[Fri May 24 13:43:50 2013] Detection parameters:
  Position = (326.9, 318.9) = 4 18 27.27 28 27 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.8 +/- 16.5
  Background counts = 52.2
  Rate = 0.001 +/- 0.0002

[Fri May 24 13:43:50 2013] Off-axis axis estimate = 2.54'
[Fri May 24 16:40:05 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:40:05 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Fri May 24 16:40:05 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Fri May 24 16:40:05 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 7.70"
[Fri May 24 17:42:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src27.ximg exists
[Fri May 24 17:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src27.csv
[Fri May 24 17:42:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri May 24 17:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src27.csv
[Fri May 24 17:42:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:42:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri May 24 17:42:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri May 24 17:42:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri May 24 17:42:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri May 24 17:42:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:42:28 2013] Source 24 is offset by 6.997272 and 5.938068 pixels which is larger than
2 X fitted extent = 1.653756 x 7.072046, not incorporating fit results
[Fri May 24 17:42:28 2013] Vigneting correction estimate = 1.000000
[Fri May 24 17:42:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 17:42:28 2013] Assessing source extent using major
[Fri May 24 17:42:28 2013] Source does appear to be extended
[Fri May 24 17:42:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 20:16:23 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri May 24 20:16:23 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Fri May 24 20:16:23 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Fri May 24 20:16:23 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.70"
[Fri May 24 21:30:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src24.ximg exists
[Fri May 24 21:30:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src24.csv
[Fri May 24 21:30:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri May 24 21:30:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src24.csv
[Fri May 24 21:30:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:30:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri May 24 21:30:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri May 24 21:30:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri May 24 21:30:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri May 24 21:30:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:30:27 2013] Source 24 is offset by 6.997272 and 3.143103 pixels which is larger than
2 X fitted extent = 2.813945 x 2.813945, not incorporating fit results
[Fri May 24 21:30:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:30:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:30:27 2013] Assessing source extent using major
[Fri May 24 21:30:27 2013] Source does appear to be extended
[Fri May 24 21:30:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:23:21 2013] XMMSAS src. selection expression = ellipse(28393.344696, 27692.193939, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 01:23:21 2013] Writing source region out to fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24_src.reg
[Sat May 25 01:23:21 2013] Extracting stamp from image fullrun_mos2_xmm0086360301_pi300-10000_cl_sm2.00.img.gz, (289, 281) - (364, 356)
[Sat May 25 01:23:21 2013] XMMSAS bgd. selection expression = annulus(28393.344696, 27692.193939, 1087.500000, 2175.000000, X, Y) && !ellipse(27397.415600, 27242.336600, 1362.184839, 1220.863235, 19.925600, X, Y) && !ellipse(27918.553772, 26113.816193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25538.537720, 26741.783722, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 01:23:21 2013] Writing fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24.gif
[Sat May 25 01:53:10 2013] Mean detx,y = (-778.87, 485.40) 
[Sat May 25 01:53:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:53:22 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:53:22 2013] Setting source spectrum file to fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat May 25 01:53:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat May 25 02:29:11 2013] Not generating rmf since there are only 70 counts
[Sat May 25 02:29:11 2013] rmf not generated due to insufficient counts
[Sat May 25 02:32:25 2013] Updating aperture counts using extracted products
[Sat May 25 02:32:25 2013] Total counts from fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 918.00
[Sat May 25 02:32:25 2013] Total counts from fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1726.00
[Sat May 25 02:32:25 2013] Got source and background scale factors 1173632.000000, 7104204.000000
[Sat May 25 02:32:25 2013] User source parameters:
  Position = (326.9, 318.9) = 4 18 27.27 28 27 37.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 632.9 +/- 31.3
  Background aperture counts = 285.1
  Rate = 0.009 +/- 0.0005

[Sat May 25 02:32:25 2013] Updating counts from extracted products
[Sat May 25 02:32:25 2013] Set source signif. to 632.86/16.89 = 37.48
[Sat May 25 02:32:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 02:32:26 2013] Using photon index=1.80, rate=0.00917, arf fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24.arf
[Sat May 25 02:32:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 02:32:26 2013] Updating source flux to 1e-13
[Sat May 25 02:32:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 02:32:46 2013] xmm0086360301/analysis//spectral/fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete