[Fri May 24 13:43:50 2013] Detection parameters:
  Position = (490.3, 225.1) = 4 17 33.44 28 20 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 313.8 +/- 21.7
  Background counts = 33.9
  Rate = 0.004 +/- 0.0003

[Fri May 24 13:43:50 2013] Off-axis axis estimate = 14.89'
[Fri May 24 16:40:05 2013] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:40:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 16:40:05 2013] Initial guess for spatial extent in simple fitting = 13.88"
[Fri May 24 16:40:05 2013] source mask rpix=3.2, npix_max = 54, mask sum = 38, frac = 0.698
[Fri May 24 16:40:05 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 13.88"
[Fri May 24 17:42:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src14.ximg exists
[Fri May 24 17:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src14.csv
[Fri May 24 17:42:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri May 24 17:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src14.csv
[Fri May 24 17:42:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:42:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri May 24 17:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 24 17:42:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri May 24 17:42:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 24 17:42:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:42:28 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.513412 pixels away
[Fri May 24 17:42:28 2013] Vigneting correction estimate = 1.000000
[Fri May 24 17:42:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 17:42:28 2013] Assessing source extent using major
[Fri May 24 17:42:28 2013] Source does appear to be extended
[Fri May 24 17:42:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 20:16:23 2013] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Fri May 24 20:16:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 20:16:23 2013] Initial guess for spatial extent in simple fitting = 13.88"
[Fri May 24 20:16:23 2013] source mask rpix=3.2, npix_max = 54, mask sum = 38, frac = 0.698
[Fri May 24 20:16:23 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.88"
[Fri May 24 21:30:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 24 21:30:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src13.csv
[Fri May 24 21:30:08 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 24 21:30:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src13.csv
[Fri May 24 21:30:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:30:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 24 21:30:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 24 21:30:09 2013] fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 24 21:30:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 24 21:30:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:30:27 2013] Spatial fit model total counts = 781.304000, observed total counts = 564.000000
[Fri May 24 21:30:27 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 21:30:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:30:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:30:27 2013] Assessing source extent using major
[Fri May 24 21:30:27 2013] Source does appear to be extended
[Fri May 24 21:30:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 01:23:19 2013] XMMSAS src. selection expression = ellipse(42608.313141, 19531.807404, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 01:23:19 2013] Writing source region out to fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13_src.reg
[Sat May 25 01:23:19 2013] Extracting stamp from image fullrun_mos2_xmm0086360301_pi300-10000_cl_sm2.00.img.gz, (453, 188) - (528, 263)
[Sat May 25 01:23:19 2013] XMMSAS bgd. selection expression = annulus(42608.313141, 19531.807404, 1087.500000, 2175.000000, X, Y)
[Sat May 25 01:23:19 2013] Writing fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13.gif
[Sat May 25 01:48:05 2013] Mean detx,y = (-16239.46, -4815.82) 
[Sat May 25 01:48:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 01:48:29 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 01:48:30 2013] Setting source spectrum file to fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat May 25 01:48:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat May 25 02:23:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 02:23:07 2013] rmf not generated due to insufficient counts
[Sat May 25 02:32:23 2013] Updating aperture counts using extracted products
[Sat May 25 02:32:23 2013] Total counts from fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 385.00
[Sat May 25 02:32:23 2013] Total counts from fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13_bgd.pi.gz = 902.00
[Sat May 25 02:32:23 2013] Got source and background scale factors 733624.000000, 5152416.000000
[Sat May 25 02:32:23 2013] User source parameters:
  Position = (490.3, 225.1) = 4 17 33.44 28 20 47.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 256.6 +/- 20.6
  Background aperture counts = 128.4
  Rate = 0.004 +/- 0.0003

[Sat May 25 02:32:23 2013] Updating counts from extracted products
[Sat May 25 02:32:23 2013] Set source signif. to 256.57/11.33 = 22.64
[Sat May 25 02:32:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 02:32:26 2013] Using photon index=1.80, rate=0.00372, arf fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13.arf
[Sat May 25 02:32:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 02:32:26 2013] Updating source flux to 2.5e-13
[Sat May 25 02:32:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 02:32:46 2013] xmm0086360301/analysis//spectral/fullrun_mos2_xmm0086360301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete