[Fri May 24 13:43:24 2013] Detection parameters: Position = (490.6, 224.9) = 4 17 33.35 28 20 45.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 258.4 +/- 20.4 Background counts = 24.9 Rate = 0.004 +/- 0.0003 [Fri May 24 13:43:25 2013] Off-axis axis estimate = 14.92' [Fri May 24 15:20:23 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting [Fri May 24 15:20:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 24 15:20:23 2013] Initial guess for spatial extent in simple fitting = 13.89" [Fri May 24 15:20:23 2013] source mask rpix=3.2, npix_max = 54, mask sum = 35, frac = 0.642 [Fri May 24 15:20:23 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.89" [Fri May 24 16:40:04 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src15.ximg exists [Fri May 24 16:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src15.csv [Fri May 24 16:40:04 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src15_1.ximg exists [Fri May 24 16:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src15.csv [Fri May 24 16:40:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 16:40:04 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Fri May 24 16:40:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src15.csv [Fri May 24 16:40:04 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Fri May 24 16:40:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src15.csv [Fri May 24 16:40:05 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 17:42:23 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.437400 pixels away [Fri May 24 17:42:23 2013] Vigneting correction estimate = 1.000000 [Fri May 24 17:42:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 17:42:23 2013] Assessing source extent using major [Fri May 24 17:42:23 2013] Source does appear to be extended [Fri May 24 17:42:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 24 19:08:00 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting [Fri May 24 19:08:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 24 19:08:00 2013] Initial guess for spatial extent in simple fitting = 13.89" [Fri May 24 19:08:00 2013] source mask rpix=3.2, npix_max = 54, mask sum = 35, frac = 0.642 [Fri May 24 19:08:00 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 13.89" [Fri May 24 20:16:22 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src15.ximg exists [Fri May 24 20:16:22 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src15.csv [Fri May 24 20:16:22 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src15_1.ximg exists [Fri May 24 20:16:22 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src15.csv [Fri May 24 20:16:22 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 20:16:23 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Fri May 24 20:16:23 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src15.csv [Fri May 24 20:16:23 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Fri May 24 20:16:23 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src15.csv [Fri May 24 20:16:23 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 21:30:23 2013] Spatial fit model total counts = -93.544300, observed total counts = 438.000000 [Fri May 24 21:30:23 2013] Poor agreement between spatial fit and data for source 5 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 24 21:30:23 2013] Vigneting correction estimate = 1.000000 [Fri May 24 21:30:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 21:30:23 2013] Assessing source extent using major [Fri May 24 21:30:23 2013] Source does appear to be extended [Fri May 24 21:30:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 25 00:26:14 2013] XMMSAS src. selection expression = ellipse(42633.360687, 19518.788467, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 25 00:26:15 2013] Writing source region out to fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5_src.reg [Sat May 25 00:26:15 2013] Extracting stamp from image fullrun_mos1_xmm0086360301_pi300-10000_cl_sm2.00.img.gz, (453, 187) - (528, 262) [Sat May 25 00:26:15 2013] XMMSAS bgd. selection expression = annulus(42633.360687, 19518.788467, 1087.500000, 2175.000000, X, Y) [Sat May 25 00:26:15 2013] Writing fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5.gif [Sat May 25 00:43:13 2013] Mean detx,y = (-4670.83, 16051.90) [Sat May 25 00:43:15 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 25 00:43:37 2013] Binned source spectrum to 10 counts/bin [Sat May 25 00:43:37 2013] Setting source spectrum file to fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sat May 25 00:43:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5_bgd.pi.gz [Sat May 25 01:20:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 25 01:20:39 2013] rmf not generated due to insufficient counts [Sat May 25 02:32:15 2013] Updating aperture counts using extracted products [Sat May 25 02:32:15 2013] Total counts from fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 292.00 [Sat May 25 02:32:15 2013] Total counts from fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 787.00 [Sat May 25 02:32:15 2013] Got source and background scale factors 427924.000000, 4083874.000000 [Sat May 25 02:32:15 2013] User source parameters: Position = (490.6, 224.9) = 4 17 33.35 28 20 45.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 209.5 +/- 18.1 Background aperture counts = 82.5 Rate = 0.003 +/- 0.0003 [Sat May 25 02:32:15 2013] Updating counts from extracted products [Sat May 25 02:32:15 2013] Set source signif. to 209.54/9.08 = 23.07 [Sat May 25 02:32:19 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 25 02:32:19 2013] Using photon index=1.80, rate=0.00304, arf fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5.arf [Sat May 25 02:32:19 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 25 02:32:19 2013] Getting flux using calc_pl_flux failed [Sat May 25 02:32:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 25 02:32:38 2013] xmm0086360301/analysis//spectral/fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete