[Fri May 24 13:43:24 2013] Detection parameters:
  Position = (305.4, 361.0) = 4 18 34.38 28 30 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.0 +/- 24.5
  Background counts = 37.0
  Rate = 0.002 +/- 0.0005

[Fri May 24 13:43:25 2013] Off-axis axis estimate = 4.57'
[Fri May 24 15:20:23 2013] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Fri May 24 15:20:23 2013] Initial guess for spatial extent in simple fitting = 8.71"
[Fri May 24 15:20:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.679
[Fri May 24 15:20:23 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.71"
[Fri May 24 16:40:04 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src19.ximg exists
[Fri May 24 16:40:04 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri May 24 16:40:04 2013] Fit fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_src19 appears to have run properly
[Fri May 24 16:40:05 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri May 24 16:40:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 24 16:40:05 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri May 24 16:40:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 24 16:40:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:42:23 2013] Warning, spatial fit 19 centroid is now closest to src. 7
[Fri May 24 17:42:23 2013] Vigneting correction estimate = 1.000000
[Fri May 24 17:42:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 17:42:23 2013] Assessing source extent using major
[Fri May 24 17:42:23 2013] Source does appear to be extended
[Fri May 24 17:42:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 17:42:23 2013] Source is confused with source 7
[Fri May 24 19:08:00 2013] Using EEF radius (= 8.71 ")to estimate initial spatial extent for simple fitting
[Fri May 24 19:08:00 2013] Initial guess for spatial extent in simple fitting = 8.71"
[Fri May 24 19:08:00 2013] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.679
[Fri May 24 19:08:00 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.71"
[Fri May 24 20:16:22 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 24 20:16:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src19.csv
[Fri May 24 20:16:22 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 24 20:16:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src19.csv
[Fri May 24 20:16:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 20:16:23 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 24 20:16:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 24 20:16:23 2013] fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 24 20:16:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 24 20:16:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:30:23 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.063502 pixels away
[Fri May 24 21:30:23 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.777115 pixels away
[Fri May 24 21:30:23 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:30:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:30:23 2013] Assessing source extent using major
[Fri May 24 21:30:23 2013] Source does appear to be extended
[Fri May 24 21:30:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 00:26:16 2013] XMMSAS src. selection expression = ellipse(26518.132019, 31362.264832, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 00:26:16 2013] Writing source region out to fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17_src.reg
[Sat May 25 00:26:16 2013] Extracting stamp from image fullrun_mos1_xmm0086360301_pi300-10000_cl_sm2.00.img.gz, (268, 324) - (343, 399)
[Sat May 25 00:26:16 2013] XMMSAS bgd. selection expression = annulus(26518.132019, 31362.264832, 1087.500000, 2175.000000, X, Y) && !ellipse(27415.306244, 27259.559570, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26549.846400, 31106.942000, 604.691217, 488.943214, 105.006000, X, Y) && !ellipse(23963.274144, 30190.208600, 489.262414, 489.262414, 0.000000, X, Y) && !ellipse(27181.283997, 32051.898071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.842200, 32039.337800, 411.039212, 411.039212, 0.000000, X, Y)
[Sat May 25 00:26:16 2013] Writing fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17.gif
[Sat May 25 00:44:42 2013] Mean detx,y = (3916.56, -1727.62) 
[Sat May 25 00:44:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 00:44:55 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 00:44:55 2013] Setting source spectrum file to fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat May 25 00:44:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat May 25 01:21:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 25 01:21:41 2013] rmf not generated due to insufficient counts
[Sat May 25 02:32:16 2013] Updating aperture counts using extracted products
[Sat May 25 02:32:16 2013] Total counts from fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 861.00
[Sat May 25 02:32:16 2013] Total counts from fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1796.00
[Sat May 25 02:32:16 2013] Got source and background scale factors 1134884.000000, 8410092.000000
[Sat May 25 02:32:16 2013] User source parameters:
  Position = (305.4, 361.0) = 4 18 34.38 28 30 36.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 618.6 +/- 30.4
  Background aperture counts = 242.4
  Rate = 0.009 +/- 0.0004

[Sat May 25 02:32:16 2013] Updating counts from extracted products
[Sat May 25 02:32:16 2013] Set source signif. to 618.64/15.57 = 39.74
[Sat May 25 02:32:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 02:32:20 2013] Using photon index=1.80, rate=0.00898, arf fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17.arf
[Sat May 25 02:32:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 02:32:20 2013] Updating source flux to 1.2e-13
[Sat May 25 02:32:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 02:32:38 2013] xmm0086360301/analysis//spectral/fullrun_mos1_xmm0086360301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete