[Fri Jul 27 01:47:28 2012] Detection parameters:
  Position = (302.0, 394.0) = 11 26 36.66 -68 32 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.2 +/- 16.2
  Background counts = 31.7
  Rate = 0.004 +/- 0.0005

[Fri Jul 27 01:47:29 2012] Off-axis axis estimate = 6.93'
[Fri Jul 27 01:49:50 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 01:49:50 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Fri Jul 27 01:49:50 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.169
[Fri Jul 27 01:49:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.90"
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 27 02:39:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 27 02:39:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 02:39:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 27 02:39:31 2012] Fit fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 27 03:48:23 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.227093 pixels away
[Fri Jul 27 03:48:23 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 03:48:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 03:48:23 2012] Assessing source extent using major
[Fri Jul 27 03:48:23 2012] Source does appear to be extended
[Fri Jul 27 03:48:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 03:48:41 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:48:41 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Fri Jul 27 03:48:41 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.169
[Fri Jul 27 03:48:41 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.90"
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 27 04:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 27 04:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 04:40:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 27 04:40:25 2012] Fit fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 27 05:44:15 2012] Spatial fit model total counts = 466.979000, observed total counts = 466.000000
[Fri Jul 27 05:44:15 2012] Offset between fit and detection position for source 3 = 0.175823 pixels
[Fri Jul 27 05:44:15 2012] 467.567300 total counts/ 379.287000 bgd. counts: snr = 4.532938
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.175823 pixels
  Position = (301.8, 394.1) = 11 26 36.80 -68 32 18.9
  Extent = 5.8 (3.7-7.9)", rotation angle = 0
  Source counts = 88.3 +/- 21.6
  Background counts = 379.3
  Rate = 0.003 +/- 0.0007
[Fri Jul 27 05:44:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:44:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:44:15 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 05:44:15 2012] Source does appear to be extended
[Fri Jul 27 05:44:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:44:33 2012] XMMSAS src. selection expression = ellipse(26206.753600, 34234.166800, 347.872810, 347.872810, 0.000000, X, Y)
[Fri Jul 27 05:44:33 2012] Writing source region out to fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 27 05:44:33 2012] Extracting stamp from image fullrun_pn_xmm0085960101_pi300-10000_cl_sm2.00.img.gz, (282, 374) - (322, 414)
[Fri Jul 27 05:44:33 2012] XMMSAS bgd. selection expression = annulus(26206.753600, 34234.166800, 579.788017, 1159.576033, X, Y)
[Fri Jul 27 05:44:33 2012] Writing fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src3.gif
[Fri Jul 27 05:46:20 2012] Mean detx,y = (-9248.36, 2960.77) 
[Fri Jul 27 05:46:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 05:46:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 05:46:36 2012] Setting source spectrum file to fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 05:46:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 27 06:07:59 2012] Not generating rmf since there are only 88 counts
[Fri Jul 27 06:07:59 2012] rmf not generated due to insufficient counts
[Fri Jul 27 06:42:18 2012] Updating aperture counts using extracted products
[Fri Jul 27 06:42:18 2012] Error reading totcts from fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 06:42:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 06:42:18 2012] Using photon index=1.80, rate=0.00287, arf fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src3.arf
[Fri Jul 27 06:42:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 06:42:18 2012] Updating source flux to 1.5e-14
[Fri Jul 27 06:42:35 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting