[Fri Jul 27 01:47:28 2012] Detection parameters:
  Position = (289.6, 293.0) = 11 26 46.50 -68 39 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 477.6 +/- 28.1
  Background counts = 36.6
  Rate = 0.02 +/- 0.001

[Fri Jul 27 01:47:29 2012] Off-axis axis estimate = 0.75'
[Fri Jul 27 01:49:50 2012] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 01:49:50 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Fri Jul 27 01:49:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Fri Jul 27 01:49:50 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 6.80"
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jul 27 02:39:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src10.csv
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jul 27 02:39:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src10.csv
[Fri Jul 27 02:39:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jul 27 02:39:31 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jul 27 02:39:31 2012] Fit fullrun_pn_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Jul 27 03:48:23 2012] Spatial fit model total counts = 790.492000, observed total counts = 791.000000
[Fri Jul 27 03:48:23 2012] Offset between fit and detection position for source 10 = 0.196019 pixels
[Fri Jul 27 03:48:23 2012] 784.855000 total counts/ 466.484000 bgd. counts: snr = 14.740599
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.196019 pixels
  Position = (289.4, 293.0) = 11 26 46.66 -68 39 38.3
  Extent = 5.2 (4.6-5.8)", rotation angle = 0
  Source counts = 318.4 +/- 28.0
  Background counts = 466.5
  Rate = 0.01 +/- 0.0009
[Fri Jul 27 03:48:23 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 03:48:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 03:48:23 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 03:48:23 2012] Source does appear to be extended
[Fri Jul 27 03:48:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 03:48:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:48:41 2012] Initial guess for spatial extent in simple fitting = 5.19"
[Fri Jul 27 03:48:41 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.047
[Fri Jul 27 03:48:41 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 5.19"
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jul 27 04:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src10.csv
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jul 27 04:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src10.csv
[Fri Jul 27 04:40:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jul 27 04:40:25 2012] fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jul 27 04:40:25 2012] Fit fullrun_pn_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Jul 27 05:44:15 2012] Spatial fit model total counts = 790.836000, observed total counts = 791.000000
[Fri Jul 27 05:44:15 2012] Offset between fit and detection position for source 10 = 0.000719 pixels
[Fri Jul 27 05:44:15 2012] 785.192000 total counts/ 467.053000 bgd. counts: snr = 14.720882
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.000719 pixels
  Position = (289.4, 293.0) = 11 26 46.66 -68 39 38.3
  Extent = 5.2 (4.6-5.8)", rotation angle = 0
  Source counts = 318.1 +/- 28.0
  Background counts = 467.1
  Rate = 0.01 +/- 0.0009
[Fri Jul 27 05:44:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:44:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:44:15 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 05:44:15 2012] Source does appear to be extended
[Fri Jul 27 05:44:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:44:33 2012] XMMSAS src. selection expression = ellipse(25128.942000, 25444.776200, 310.303209, 310.303209, 0.000000, X, Y)
[Fri Jul 27 05:44:33 2012] Writing source region out to fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src10_src.reg
[Fri Jul 27 05:44:33 2012] Extracting stamp from image fullrun_pn_xmm0085960101_pi300-10000_cl_sm2.00.img.gz, (272, 275) - (307, 311)
[Fri Jul 27 05:44:33 2012] XMMSAS bgd. selection expression = annulus(25128.942000, 25444.776200, 517.172015, 1034.344030, X, Y) && !ellipse(23701.277382, 25211.041800, 439.881613, 439.881613, 0.000000, X, Y)
[Fri Jul 27 05:44:33 2012] Writing fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src10.gif
[Fri Jul 27 05:51:19 2012] Mean detx,y = (-428.56, 2141.57) 
[Fri Jul 27 05:51:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 05:51:33 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 05:51:34 2012] Setting source spectrum file to fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 27 05:51:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jul 27 06:42:18 2012] Updating aperture counts using extracted products
[Fri Jul 27 06:42:18 2012] Error reading totcts from fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 27 06:42:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 06:42:18 2012] Using photon index=1.80, rate=0.0104, arf fullrun_pn_xmm0085960101_pi300-10000_pass1_cl_src10.arf
[Fri Jul 27 06:42:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 06:42:18 2012] Updating source flux to 3.3e-14