[Fri Jul 27 01:48:09 2012] Detection parameters:
  Position = (412.9, 350.4) = 11 25 8.54 -68 35 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.7 +/- 11.0
  Background counts = 6.4
  Rate = 0.002 +/- 0.0003

[Fri Jul 27 01:48:09 2012] Off-axis axis estimate = 9.11'
[Fri Jul 27 03:23:55 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:23:55 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Fri Jul 27 03:23:55 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.929
[Fri Jul 27 03:23:55 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.98"
[Fri Jul 27 03:48:15 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 27 03:48:15 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 27 03:48:15 2012] Fit fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jul 27 03:48:16 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 27 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jul 27 03:48:16 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 27 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jul 27 03:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 03:48:32 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.626153 pixels away
[Fri Jul 27 03:48:32 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 03:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 03:48:32 2012] Assessing source extent using major
[Fri Jul 27 03:48:32 2012] Source does appear to be extended
[Fri Jul 27 03:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:21:00 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:21:00 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Fri Jul 27 05:21:00 2012] source mask rpix=2.5, npix_max = 36, mask sum = 34, frac = 0.929
[Fri Jul 27 05:21:00 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.98"
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src6.csv
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src6.csv
[Fri Jul 27 05:44:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 27 05:44:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 05:44:24 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.604019 pixels away
[Fri Jul 27 05:44:24 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:44:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:44:24 2012] Assessing source extent using major
[Fri Jul 27 05:44:24 2012] Source does appear to be extended
[Fri Jul 27 05:44:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:32:32 2012] XMMSAS src. selection expression = ellipse(35870.252350, 30435.314453, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 06:32:32 2012] Writing source region out to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src9_src.reg
[Fri Jul 27 06:32:32 2012] Extracting stamp from image fullrun_mos2_xmm0085960101_pi300-10000_cl_sm2.00.img.gz, (375, 313) - (450, 388)
[Fri Jul 27 06:32:32 2012] XMMSAS bgd. selection expression = annulus(35870.252350, 30435.314453, 1087.500000, 2175.000000, X, Y) && !ellipse(33363.635940, 28081.359800, 397.176811, 397.176811, 0.000000, X, Y)
[Fri Jul 27 06:32:32 2012] Writing fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src9.gif
[Fri Jul 27 06:33:28 2012] Mean detx,y = (7815.11, 7121.12) 
[Fri Jul 27 06:33:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:33:52 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:33:52 2012] Setting source spectrum file to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jul 27 06:33:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jul 27 06:40:33 2012] Not generating rmf since there are only 74 counts
[Fri Jul 27 06:40:33 2012] rmf not generated due to insufficient counts
[Fri Jul 27 06:42:19 2012] Updating aperture counts using extracted products
[Fri Jul 27 06:42:19 2012] Error reading totcts from fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jul 27 06:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 06:42:20 2012] Using photon index=1.80, rate=0.00224, arf fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src9.arf
[Fri Jul 27 06:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 06:42:20 2012] Updating source flux to 5.4e-14
[Fri Jul 27 06:42:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting