[Fri Jul 27 01:48:09 2012] Detection parameters:
  Position = (289.5, 293.0) = 11 26 46.58 -68 39 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.5 +/- 17.1
  Background counts = 9.5
  Rate = 0.006 +/- 0.0005

[Fri Jul 27 01:48:09 2012] Off-axis axis estimate = 0.76'
[Fri Jul 27 03:23:55 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:23:55 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Fri Jul 27 03:23:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.173
[Fri Jul 27 03:23:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.81"
[Fri Jul 27 03:48:15 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 03:48:15 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 03:48:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 03:48:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 03:48:16 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 03:48:16 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 03:48:16 2012] Fit fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 03:48:32 2012] Spatial fit model total counts = 249.000000, observed total counts = 249.000000
[Fri Jul 27 03:48:32 2012] Offset between fit and detection position for source 2 = 0.206133 pixels
[Fri Jul 27 03:48:32 2012] 245.827000 total counts/ 124.103000 bgd. counts: snr = 10.926601
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.206133 pixels
  Position = (289.3, 293.1) = 11 26 46.75 -68 39 38.2
  Extent = 4.6 (3.9-5.3)", rotation angle = 0
  Source counts = 121.7 +/- 15.7
  Background counts = 124.1
  Rate = 0.004 +/- 0.0005
[Fri Jul 27 03:48:32 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 03:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 03:48:32 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 03:48:32 2012] Source does appear to be extended
[Fri Jul 27 03:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:21:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:21:00 2012] Initial guess for spatial extent in simple fitting = 4.58"
[Fri Jul 27 05:21:00 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.933
[Fri Jul 27 05:21:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.58"
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 05:44:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 05:44:08 2012] Fit fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 27 05:44:24 2012] Spatial fit model total counts = 249.000000, observed total counts = 249.000000
[Fri Jul 27 05:44:24 2012] Offset between fit and detection position for source 2 = 0.000040 pixels
[Fri Jul 27 05:44:24 2012] 245.827000 total counts/ 124.107000 bgd. counts: snr = 10.926066
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000040 pixels
  Position = (289.3, 293.1) = 11 26 46.75 -68 39 38.2
  Extent = 4.6 (3.9-5.4)", rotation angle = 0
  Source counts = 121.7 +/- 15.7
  Background counts = 124.1
  Rate = 0.004 +/- 0.0005
[Fri Jul 27 05:44:24 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:44:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:44:24 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 05:44:24 2012] Source does appear to be extended
[Fri Jul 27 05:44:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:32:32 2012] XMMSAS src. selection expression = ellipse(25118.703800, 25447.622800, 274.722073, 274.722073, 0.000000, X, Y)
[Fri Jul 27 06:32:32 2012] Writing source region out to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 27 06:32:32 2012] Extracting stamp from image fullrun_mos2_xmm0085960101_pi300-10000_cl_sm2.00.img.gz, (273, 277) - (305, 309)
[Fri Jul 27 06:32:32 2012] XMMSAS bgd. selection expression = annulus(25118.703800, 25447.622800, 457.870121, 915.740243, X, Y)
[Fri Jul 27 06:32:32 2012] Writing fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2.gif
[Fri Jul 27 06:32:34 2012] Mean detx,y = (557.36, -2304.22) 
[Fri Jul 27 06:32:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:32:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:32:42 2012] Setting source spectrum file to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 27 06:32:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 27 06:42:19 2012] Updating aperture counts using extracted products
[Fri Jul 27 06:42:19 2012] Error reading totcts from fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 27 06:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 06:42:20 2012] Using photon index=1.80, rate=0.00366, arf fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 27 06:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 06:42:20 2012] Updating source flux to 4.7e-14
[Fri Jul 27 06:42:35 2012] Reading fit data from xmm0085960101/analysis//spectral/fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 27 06:42:35 2012] Spectral fit parameter nH value = 3.24934e+21
[Fri Jul 27 06:42:35 2012] Spectral fit parameter PhoIndex value = 4.05587
[Fri Jul 27 06:42:35 2012] Failed to get F(0.3-8.0) from xmm0085960101/analysis//spectral/fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 06:42:35 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 06:42:35 2012] Using Nh = 3.2e+21, photon index=4.06, rate=0.00366, arf fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 27 06:42:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 06:42:35 2012] Updating source flux to 3.1e-14