[Fri Jul 27 01:48:09 2012] Detection parameters:
  Position = (272.9, 290.2) = 11 26 59.80 -68 39 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.5 +/- 9.8
  Background counts = 9.1
  Rate = 0.002 +/- 0.0003

[Fri Jul 27 01:48:09 2012] Off-axis axis estimate = 1.95'
[Fri Jul 27 03:23:55 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:23:55 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Jul 27 03:23:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Fri Jul 27 03:23:55 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.40"
[Fri Jul 27 03:48:15 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jul 27 03:48:15 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jul 27 03:48:15 2012] Fit fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri Jul 27 03:48:16 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jul 27 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jul 27 03:48:16 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jul 27 03:48:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jul 27 03:48:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 03:48:32 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 16.890828 pixels away
[Fri Jul 27 03:48:32 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 03:48:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 03:48:32 2012] Assessing source extent using major
[Fri Jul 27 03:48:32 2012] Source does appear to be extended
[Fri Jul 27 03:48:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:21:00 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:21:00 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Jul 27 05:21:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Fri Jul 27 05:21:00 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.40"
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src11.csv
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul 27 05:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src11.csv
[Fri Jul 27 05:44:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul 27 05:44:08 2012] fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul 27 05:44:08 2012] Fit fullrun_mos2_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jul 27 05:44:24 2012] Spatial fit model total counts = 129.274000, observed total counts = 121.000000
[Fri Jul 27 05:44:24 2012] Offset between fit and detection position for source 16 = 0.255721 pixels
[Fri Jul 27 05:44:24 2012] 128.490800 total counts/ 92.410800 bgd. counts: snr = 3.753230
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.255721 pixels
  Position = (272.6, 290.1) = 11 27 0.00 -68 39 50.9
  Extent = 5.4 (3.9-7.6)", rotation angle = 0
  Source counts = 36.1 +/- 11.3
  Background counts = 92.4
  Rate = 0.001 +/- 0.0003
[Fri Jul 27 05:44:24 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:44:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:44:24 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 05:44:24 2012] Source does appear to be extended
[Fri Jul 27 05:44:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:32:32 2012] XMMSAS src. selection expression = ellipse(23672.045000, 25192.805800, 326.884997, 326.884997, 0.000000, X, Y)
[Fri Jul 27 06:32:32 2012] Writing source region out to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src16_src.reg
[Fri Jul 27 06:32:32 2012] Extracting stamp from image fullrun_mos2_xmm0085960101_pi300-10000_cl_sm2.00.img.gz, (254, 271) - (291, 309)
[Fri Jul 27 06:32:32 2012] XMMSAS bgd. selection expression = annulus(23672.045000, 25192.805800, 544.808328, 1089.616657, X, Y) && !ellipse(25118.703800, 25447.622800, 366.296097, 366.296097, 0.000000, X, Y)
[Fri Jul 27 06:32:32 2012] Writing fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src16.gif
[Fri Jul 27 06:34:49 2012] Mean detx,y = (-5.88, -3661.55) 
[Fri Jul 27 06:34:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:34:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:34:55 2012] Setting source spectrum file to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 27 06:34:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jul 27 06:40:59 2012] Not generating rmf since there are only 36 counts
[Fri Jul 27 06:40:59 2012] rmf not generated due to insufficient counts
[Fri Jul 27 06:42:19 2012] Updating aperture counts using extracted products
[Fri Jul 27 06:42:19 2012] Error reading totcts from fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 27 06:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 06:42:20 2012] Using photon index=1.80, rate=0.00108, arf fullrun_mos2_xmm0085960101_pi300-10000_pass1_cl_src16.arf
[Fri Jul 27 06:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 06:42:20 2012] Updating source flux to 1.2e-14
[Fri Jul 27 06:42:28 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting