[Fri Jul 27 01:47:49 2012] Detection parameters: Position = (142.2, 323.7) = 11 28 43.72 -68 37 21.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 53.2 +/- 9.7 Background counts = 6.9 Rate = 0.002 +/- 0.0003 [Fri Jul 27 01:47:49 2012] Off-axis axis estimate = 11.47' [Fri Jul 27 02:39:32 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting [Fri Jul 27 02:39:32 2012] Initial guess for spatial extent in simple fitting = 12.16" [Fri Jul 27 02:39:32 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.127 [Fri Jul 27 02:39:32 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.16" [Fri Jul 27 03:23:54 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src17.ximg exists [Fri Jul 27 03:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src17.csv [Fri Jul 27 03:23:54 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src17_1.ximg exists [Fri Jul 27 03:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src17.csv [Fri Jul 27 03:23:54 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 27 03:23:55 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Fri Jul 27 03:23:55 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Fri Jul 27 03:23:55 2012] Fit fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly [Fri Jul 27 03:48:29 2012] Spatial fit model total counts = 141.701000, observed total counts = 139.000000 [Fri Jul 27 03:48:29 2012] Offset between fit and detection position for source 5 = 1.499287 pixels [Fri Jul 27 03:48:29 2012] Warning, changing simple spatial fit ID from 17 to 9 [Fri Jul 27 03:48:29 2012] 142.306121 total counts/ 142.306000 bgd. counts: snr = 0.000010 Spatial fit parameters: Offset between fit and detection position for source 5 = 1.499287 pixels Position = (143.1, 324.9) = 11 28 43.03 -68 37 16.9 Extent = 3.2 (3.2-5.5)", rotation angle = 0 Source counts = 0.0 +/- 11.9 Background counts = 142.3 Rate = 4e-09 +/- 0.0004 Deleting source due to low Poisson probability