[Fri Jul 27 01:47:49 2012] Detection parameters:
  Position = (301.4, 394.0) = 11 26 37.10 -68 32 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.9 +/- 8.8
  Background counts = 8.6
  Rate = 0.002 +/- 0.0005

[Fri Jul 27 01:47:49 2012] Off-axis axis estimate = 6.93'
[Fri Jul 27 02:39:32 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 02:39:32 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Fri Jul 27 02:39:32 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.974
[Fri Jul 27 02:39:32 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.89"
[Fri Jul 27 03:23:54 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jul 27 03:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 03:23:54 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jul 27 03:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 03:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 03:23:54 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jul 27 03:23:54 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jul 27 03:23:54 2012] Fit fullrun_mos1_xmm0085960101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jul 27 03:48:29 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.893055 pixels away
[Fri Jul 27 03:48:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 03:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 03:48:29 2012] Assessing source extent using major
[Fri Jul 27 03:48:29 2012] Source does appear to be extended
[Fri Jul 27 03:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 04:40:26 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 04:40:26 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Fri Jul 27 04:40:26 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.974
[Fri Jul 27 04:40:26 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.89"
[Fri Jul 27 05:20:58 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jul 27 05:20:58 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jul 27 05:20:58 2012] Fit fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_src7 appears to have run properly
[Fri Jul 27 05:20:59 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 27 05:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jul 27 05:20:59 2012] fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 27 05:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jul 27 05:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085960101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 05:44:21 2012] Spatial fit model total counts = 133.978000, observed total counts = 127.000000
[Fri Jul 27 05:44:21 2012] Offset between fit and detection position for source 11 = 0.368922 pixels
[Fri Jul 27 05:44:21 2012] 136.741100 total counts/ 108.910000 bgd. counts: snr = 2.666837
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.368922 pixels
  Position = (301.7, 393.9) = 11 26 36.83 -68 32 19.7
  Extent = 4.5" x 4.5", rotation angle = 0
  Source counts = 27.8 +/- 11.7
  Background counts = 108.9
  Rate = 0.0008 +/- 0.0004
[Fri Jul 27 05:44:21 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:44:21 2012] Assessing source extent using major
[Fri Jul 27 05:44:21 2012] Source does appear to be extended
[Fri Jul 27 05:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:19:53 2012] XMMSAS src. selection expression = ellipse(26202.685060, 34217.694800, 267.810608, 267.810608, 0.000000, X, Y)
[Fri Jul 27 06:19:53 2012] Writing source region out to fullrun_mos1_xmm0085960101_pi300-10000_pass1_cl_src11_src.reg
[Fri Jul 27 06:19:53 2012] Extracting stamp from image fullrun_mos1_xmm0085960101_pi300-10000_cl_sm2.00.img.gz, (286, 378) - (317, 409)
[Fri Jul 27 06:19:53 2012] XMMSAS bgd. selection expression = annulus(26202.685060, 34217.694800, 446.351013, 892.702026, X, Y)
[Fri Jul 27 06:19:53 2012] Writing fullrun_mos1_xmm0085960101_pi300-10000_pass1_cl_src11.gif
[Fri Jul 27 06:21:08 2012] Mean detx,y = (-2942.36, -9539.51) 
[Fri Jul 27 06:21:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:21:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:21:16 2012] Setting source spectrum file to fullrun_mos1_xmm0085960101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 27 06:21:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085960101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jul 27 06:30:28 2012] Not generating rmf since there are only 27 counts
[Fri Jul 27 06:30:28 2012] rmf not generated due to insufficient counts
[Fri Jul 27 06:42:19 2012] Updating aperture counts using extracted products
[Fri Jul 27 06:42:19 2012] Error reading totcts from fullrun_mos1_xmm0085960101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 27 06:42:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 06:42:19 2012] Using photon index=1.80, rate=0.000836, arf fullrun_mos1_xmm0085960101_pi300-10000_pass1_cl_src11.arf
[Fri Jul 27 06:42:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 06:42:19 2012] Updating source flux to 1.8e-14
[Fri Jul 27 06:42:21 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting