[Thu Jul  5 23:55:57 2012] Detection parameters:
  Position = (266.6, 196.2) = 9 36 6.33 61 15 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.5 +/- 14.1
  Background counts = 9.5
  Rate = 0.007 +/- 0.0008

[Thu Jul  5 23:55:57 2012] Off-axis axis estimate = 7.77'
[Fri Jul  6 01:34:44 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:34:44 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Fri Jul  6 01:34:44 2012] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.546
[Fri Jul  6 01:34:44 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.31"
[Fri Jul  6 02:24:35 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul  6 02:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src4.csv
[Fri Jul  6 02:24:35 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul  6 02:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src4.csv
[Fri Jul  6 02:24:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul  6 02:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul  6 02:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul  6 02:24:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 02:24:52 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.424482 pixels away
[Fri Jul  6 02:24:52 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 02:24:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 02:24:52 2012] Assessing source extent using major
[Fri Jul  6 02:24:52 2012] Source does appear to be extended
[Fri Jul  6 02:24:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:55:36 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:55:36 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Fri Jul  6 03:55:36 2012] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.546
[Fri Jul  6 03:55:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.31"
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src4.csv
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src4.csv
[Fri Jul  6 04:42:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul  6 04:42:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:43:18 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.424482 pixels away
[Fri Jul  6 04:43:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:43:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:43:18 2012] Assessing source extent using major
[Fri Jul  6 04:43:18 2012] Source does appear to be extended
[Fri Jul  6 04:43:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 05:54:28 2012] XMMSAS src. selection expression = ellipse(23141.829498, 17017.361908, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 05:54:28 2012] Writing source region out to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src5_src.reg
[Fri Jul  6 05:54:28 2012] Extracting stamp from image fullrun_mos2_xmm0085640201_pi300-10000_cl_sm2.00.img.gz, (229, 159) - (304, 234)
[Fri Jul  6 05:54:28 2012] XMMSAS bgd. selection expression = annulus(23141.829498, 17017.361908, 1087.500000, 2175.000000, X, Y) && !ellipse(24304.506653, 15116.075516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22070.339325, 15766.718323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24821.104260, 19390.425200, 306.691209, 306.691209, 0.000000, X, Y)
[Fri Jul  6 05:54:28 2012] Writing fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src5.gif
[Fri Jul  6 05:55:01 2012] Mean detx,y = (-3886.75, 6231.39) 
[Fri Jul  6 05:55:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 05:55:18 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 05:55:18 2012] Setting source spectrum file to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul  6 05:55:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul  6 06:11:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 06:11:03 2012] rmf not generated due to insufficient counts
[Fri Jul  6 06:25:16 2012] Updating aperture counts using extracted products
[Fri Jul  6 06:25:16 2012] Error reading totcts from fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul  6 06:25:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 06:25:16 2012] Using photon index=1.80, rate=0.00736, arf fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src5.arf
[Fri Jul  6 06:25:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 06:25:16 2012] Updating source flux to 1.4e-13
[Fri Jul  6 06:25:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting