[Thu Jul  5 23:55:57 2012] Detection parameters:
  Position = (346.3, 324.3) = 9 35 18.12 61 24 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.6 +/- 9.5
  Background counts = 10.1
  Rate = 0.002 +/- 0.0004

[Thu Jul  5 23:55:57 2012] Off-axis axis estimate = 3.94'
[Fri Jul  6 01:34:44 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:34:44 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Jul  6 01:34:44 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Fri Jul  6 01:34:44 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.40"
[Fri Jul  6 02:24:35 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jul  6 02:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src29.csv
[Fri Jul  6 02:24:35 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jul  6 02:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src29.csv
[Fri Jul  6 02:24:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jul  6 02:24:36 2012] Fit fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Jul  6 02:24:52 2012] Spatial fit model total counts = 207.207000, observed total counts = 208.000000
[Fri Jul  6 02:24:52 2012] Offset between fit and detection position for source 30 = 0.339763 pixels
[Fri Jul  6 02:24:52 2012] Warning, changing simple spatial fit ID from 29 to 20
[Fri Jul  6 02:24:52 2012] 203.707800 total counts/ 187.978000 bgd. counts: snr = 1.147281
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.339763 pixels
  Position = (346.4, 324.7) = 9 35 18.06 61 24 37.8
  Extent = 3.2 (2.0-5.8)", rotation angle = 0
  Source counts = 15.7 +/- 14.3
  Background counts = 188.0
  Rate = 0.0005 +/- 0.0004
  Deleting source due to low Poisson probability