[Thu Jul  5 23:55:57 2012] Detection parameters:
  Position = (160.5, 371.5) = 9 37 10.83 61 28 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 8.6
  Background counts = 10.0
  Rate = 0.001 +/- 0.0003

[Thu Jul  5 23:55:57 2012] Off-axis axis estimate = 11.31'
[Fri Jul  6 01:34:44 2012] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:34:44 2012] Initial guess for spatial extent in simple fitting = 12.09"
[Fri Jul  6 01:34:44 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.140
[Fri Jul  6 01:34:44 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 12.09"
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src47.ximg exists
[Fri Jul  6 02:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src47.csv
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Jul  6 02:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src47.csv
[Fri Jul  6 02:24:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Jul  6 02:24:36 2012] Fit fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Jul  6 02:24:52 2012] Spatial fit model total counts = 120.999000, observed total counts = 121.000000
[Fri Jul  6 02:24:52 2012] Offset between fit and detection position for source 27 = 0.167832 pixels
[Fri Jul  6 02:24:52 2012] 120.837000 total counts/ 99.670100 bgd. counts: snr = 2.120190
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.167832 pixels
  Position = (160.6, 371.6) = 9 37 10.80 61 28 0.7
  Extent = 3.3 (3.0-5.3)", rotation angle = 0
  Source counts = 21.2 +/- 11.0
  Background counts = 99.7
  Rate = 0.0006 +/- 0.0003
[Fri Jul  6 02:24:52 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 02:24:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 02:24:52 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 02:24:52 2012] Source does appear to be extended
[Fri Jul  6 02:24:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:55:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:55:36 2012] Initial guess for spatial extent in simple fitting = 3.34"
[Fri Jul  6 03:55:36 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.398
[Fri Jul  6 03:55:36 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 3.34"
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src44.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src44.csv
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src44.csv
[Fri Jul  6 04:42:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:42:58 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Jul  6 04:42:58 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Jul  6 04:42:58 2012] Fit fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Jul  6 04:43:18 2012] Spatial fit model total counts = 120.928000, observed total counts = 121.000000
[Fri Jul  6 04:43:18 2012] Offset between fit and detection position for source 27 = 0.021282 pixels
[Fri Jul  6 04:43:18 2012] 120.761300 total counts/ 99.259800 bgd. counts: snr = 2.158152
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.021282 pixels
  Position = (160.6, 371.6) = 9 37 10.80 61 28 0.6
  Extent = 3.5 (2.1-5.3)", rotation angle = 0
  Source counts = 21.5 +/- 11.0
  Background counts = 99.3
  Rate = 0.0006 +/- 0.0003
[Fri Jul  6 04:43:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:43:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:43:18 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:43:18 2012] Source does appear to be extended
[Fri Jul  6 04:43:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 05:54:28 2012] XMMSAS src. selection expression = ellipse(13923.311200, 32281.824600, 208.456206, 208.456206, 0.000000, X, Y)
[Fri Jul  6 05:54:28 2012] Writing source region out to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src27_src.reg
[Fri Jul  6 05:54:28 2012] Extracting stamp from image fullrun_mos2_xmm0085640201_pi300-10000_cl_sm2.00.img.gz, (149, 360) - (173, 384)
[Fri Jul  6 05:54:28 2012] XMMSAS bgd. selection expression = annulus(13923.311200, 32281.824600, 347.427010, 694.854020, X, Y)
[Fri Jul  6 05:54:28 2012] Writing fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src27.gif
[Fri Jul  6 06:03:44 2012] Mean detx,y = (-8675.69, -10940.76) 
[Fri Jul  6 06:03:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 06:03:51 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 06:03:51 2012] Setting source spectrum file to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jul  6 06:03:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri Jul  6 06:21:09 2012] Not generating rmf since there are only 21 counts
[Fri Jul  6 06:21:09 2012] rmf not generated due to insufficient counts
[Fri Jul  6 06:25:16 2012] Updating aperture counts using extracted products
[Fri Jul  6 06:25:16 2012] Error reading totcts from fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Jul  6 06:25:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 06:25:17 2012] Using photon index=1.80, rate=0.000627, arf fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src27.arf
[Fri Jul  6 06:25:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 06:25:17 2012] Updating source flux to 2.4e-14
[Fri Jul  6 06:25:42 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting