[Thu Jul  5 23:55:57 2012] Detection parameters:
  Position = (279.9, 174.3) = 9 35 58.26 61 13 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.5 +/- 10.9
  Background counts = 9.9
  Rate = 0.003 +/- 0.0006

[Thu Jul  5 23:55:57 2012] Off-axis axis estimate = 9.10'
[Fri Jul  6 01:34:44 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:34:44 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Fri Jul  6 01:34:44 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Fri Jul  6 01:34:44 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.98"
[Fri Jul  6 02:24:35 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul  6 02:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src13.csv
[Fri Jul  6 02:24:35 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul  6 02:24:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src13.csv
[Fri Jul  6 02:24:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul  6 02:24:36 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul  6 02:24:36 2012] Fit fullrun_mos2_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul  6 02:24:52 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.531862 pixels away
[Fri Jul  6 02:24:52 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 02:24:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 02:24:52 2012] Assessing source extent using major
[Fri Jul  6 02:24:52 2012] Source does appear to be extended
[Fri Jul  6 02:24:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:55:36 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:55:36 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Fri Jul  6 03:55:36 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Fri Jul  6 03:55:36 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.98"
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src13.csv
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul  6 04:42:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src13.csv
[Fri Jul  6 04:42:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul  6 04:42:57 2012] fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul  6 04:42:57 2012] Fit fullrun_mos2_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jul  6 04:43:18 2012] Spatial fit model total counts = 175.355000, observed total counts = 159.000000
[Fri Jul  6 04:43:18 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 04:43:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:43:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:43:18 2012] Assessing source extent using major
[Fri Jul  6 04:43:18 2012] Source does appear to be extended
[Fri Jul  6 04:43:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 05:54:28 2012] XMMSAS src. selection expression = ellipse(24304.506653, 15116.075516, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 05:54:28 2012] Writing source region out to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src25_src.reg
[Fri Jul  6 05:54:28 2012] Extracting stamp from image fullrun_mos2_xmm0085640201_pi300-10000_cl_sm2.00.img.gz, (242, 137) - (317, 212)
[Fri Jul  6 05:54:28 2012] XMMSAS bgd. selection expression = annulus(24304.506653, 15116.075516, 1087.500000, 2175.000000, X, Y) && !ellipse(23141.829498, 17017.361908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22070.339325, 15766.718323, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 05:54:28 2012] Writing fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src25.gif
[Fri Jul  6 05:57:15 2012] Mean detx,y = (-3244.74, 8329.43) 
[Fri Jul  6 05:57:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 05:57:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 05:57:26 2012] Setting source spectrum file to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jul  6 05:57:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jul  6 06:15:27 2012] Not generating rmf since there are only 65 counts
[Fri Jul  6 06:15:27 2012] rmf not generated due to insufficient counts
[Fri Jul  6 06:25:16 2012] Updating aperture counts using extracted products
[Fri Jul  6 06:25:16 2012] Error reading totcts from fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jul  6 06:25:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 06:25:17 2012] Using photon index=1.80, rate=0.00334, arf fullrun_mos2_xmm0085640201_pi300-10000_pass1_cl_src25.arf
[Fri Jul  6 06:25:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 06:25:17 2012] Updating source flux to 5.9e-14
[Fri Jul  6 06:25:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting