[Thu Jul  5 23:55:27 2012] Detection parameters:
  Position = (247.6, 236.1) = 9 36 17.83 61 18 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.8 +/- 9.6
  Background counts = 10.8
  Rate = 0.002 +/- 0.0003

[Thu Jul  5 23:55:27 2012] Off-axis axis estimate = 5.83'
[Fri Jul  6 00:51:26 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 00:51:26 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Fri Jul  6 00:51:26 2012] source mask rpix=2.1, npix_max = 28, mask sum = 28, frac = 0.998
[Fri Jul  6 00:51:26 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.34"
[Fri Jul  6 01:34:43 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jul  6 01:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src30.csv
[Fri Jul  6 01:34:43 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jul  6 01:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src30.csv
[Fri Jul  6 01:34:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:34:44 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jul  6 01:34:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jul  6 01:34:44 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jul  6 01:34:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jul  6 01:34:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 02:24:47 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 12.720018 pixels away
[Fri Jul  6 02:24:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 02:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 02:24:47 2012] Assessing source extent using major
[Fri Jul  6 02:24:47 2012] Source does appear to be extended
[Fri Jul  6 02:24:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:15:56 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:15:56 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Fri Jul  6 03:15:56 2012] source mask rpix=2.1, npix_max = 28, mask sum = 28, frac = 0.998
[Fri Jul  6 03:15:56 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 9.34"
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src29.ximg exists
[Fri Jul  6 03:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src29.csv
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Jul  6 03:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src29.csv
[Fri Jul  6 03:55:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Jul  6 03:55:36 2012] Fit fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Jul  6 04:43:13 2012] Spatial fit model total counts = 139.623000, observed total counts = 129.000000
[Fri Jul  6 04:43:13 2012] Offset between fit and detection position for source 40 = 0.138852 pixels
[Fri Jul  6 04:43:13 2012] 140.039000 total counts/ 107.859000 bgd. counts: snr = 3.098545
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.138852 pixels
  Position = (247.7, 236.3) = 9 36 17.78 61 18 13.2
  Extent = 3.7 (2.5-4.9)", rotation angle = 0
  Source counts = 32.2 +/- 11.8
  Background counts = 107.9
  Rate = 0.0009 +/- 0.0003
[Fri Jul  6 04:43:13 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:43:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:43:13 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:43:13 2012] Source does appear to be extended
[Fri Jul  6 04:43:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 05:28:15 2012] XMMSAS src. selection expression = ellipse(21498.076800, 20505.562400, 219.987606, 219.987606, 0.000000, X, Y)
[Fri Jul  6 05:28:15 2012] Writing source region out to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src40_src.reg
[Fri Jul  6 05:28:15 2012] Extracting stamp from image fullrun_mos1_xmm0085640201_pi300-10000_cl_sm2.00.img.gz, (235, 224) - (260, 249)
[Fri Jul  6 05:28:15 2012] XMMSAS bgd. selection expression = annulus(21498.076800, 20505.562400, 366.646011, 733.292021, X, Y)
[Fri Jul  6 05:28:15 2012] Writing fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src40.gif
[Fri Jul  6 05:34:54 2012] Mean detx,y = (2614.34, 4353.41) 
[Fri Jul  6 05:34:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 05:34:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 05:34:59 2012] Setting source spectrum file to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Jul  6 05:34:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Fri Jul  6 05:50:24 2012] Not generating rmf since there are only 32 counts
[Fri Jul  6 05:50:24 2012] rmf not generated due to insufficient counts
[Fri Jul  6 06:25:15 2012] Updating aperture counts using extracted products
[Fri Jul  6 06:25:15 2012] Error reading totcts from fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Jul  6 06:25:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 06:25:16 2012] Using photon index=1.80, rate=0.000939, arf fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src40.arf
[Fri Jul  6 06:25:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 06:25:16 2012] Updating source flux to 1.5e-14
[Fri Jul  6 06:25:19 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting