[Thu Jul  5 23:55:27 2012] Detection parameters:
  Position = (212.2, 251.3) = 9 36 39.23 61 19 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 9.1
  Background counts = 12.0
  Rate = 0.002 +/- 0.0004

[Thu Jul  5 23:55:27 2012] Off-axis axis estimate = 7.12'
[Fri Jul  6 00:51:26 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 00:51:26 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Fri Jul  6 00:51:26 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.863
[Fri Jul  6 00:51:26 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.99"
[Fri Jul  6 01:34:43 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jul  6 01:34:43 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jul  6 01:34:43 2012] Fit fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src27 appears to have run properly
[Fri Jul  6 01:34:44 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jul  6 01:34:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jul  6 01:34:44 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jul  6 01:34:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jul  6 01:34:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 02:24:47 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 11.996141 pixels away
[Fri Jul  6 02:24:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 02:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 02:24:47 2012] Assessing source extent using major
[Fri Jul  6 02:24:47 2012] Source does appear to be extended
[Fri Jul  6 02:24:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:15:56 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:15:56 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Fri Jul  6 03:15:56 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.863
[Fri Jul  6 03:15:56 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 9.99"
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jul  6 03:55:36 2012] Fit fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src26 appears to have run properly
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jul  6 03:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jul  6 03:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jul  6 03:55:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:43:13 2012] Spatial fit model total counts = 146.626000, observed total counts = 143.000000
[Fri Jul  6 04:43:13 2012] Offset between fit and detection position for source 38 = 0.247270 pixels
[Fri Jul  6 04:43:13 2012] 146.507600 total counts/ 107.615000 bgd. counts: snr = 3.749131
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.247270 pixels
  Position = (212.0, 251.5) = 9 36 39.36 61 19 18.9
  Extent = 5.9 (2.5-5.3)" x 2.5 (-0.3-4.1)", rotation angle = 56 (90-260) degrees
  Source counts = 38.9 +/- 12.1
  Background counts = 107.6
  Rate = 0.001 +/- 0.0004
[Fri Jul  6 04:43:13 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:43:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:43:13 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:43:13 2012] Source does appear to be extended
[Fri Jul  6 04:43:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.61
[Fri Jul  6 05:28:15 2012] XMMSAS src. selection expression = ellipse(18393.942126, 21828.359400, 356.987410, 152.105404, 55.620552, X, Y)
[Fri Jul  6 05:28:15 2012] Writing source region out to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src38_src.reg
[Fri Jul  6 05:28:15 2012] Extracting stamp from image fullrun_mos1_xmm0085640201_pi300-10000_cl_sm2.00.img.gz, (191, 231) - (232, 272)
[Fri Jul  6 05:28:15 2012] XMMSAS bgd. selection expression = annulus(18393.942126, 21828.359400, 594.979017, 1189.958034, X, Y)
[Fri Jul  6 05:28:15 2012] Writing fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src38.gif
[Fri Jul  6 05:34:24 2012] Mean detx,y = (491.57, 6973.86) 
[Fri Jul  6 05:34:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 05:34:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 05:34:36 2012] Setting source spectrum file to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jul  6 05:34:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri Jul  6 05:50:07 2012] Not generating rmf since there are only 38 counts
[Fri Jul  6 05:50:07 2012] rmf not generated due to insufficient counts
[Fri Jul  6 06:25:15 2012] Updating aperture counts using extracted products
[Fri Jul  6 06:25:15 2012] Error reading totcts from fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jul  6 06:25:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 06:25:16 2012] Using photon index=1.80, rate=0.00114, arf fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src38.arf
[Fri Jul  6 06:25:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 06:25:16 2012] Updating source flux to 2.3e-14
[Fri Jul  6 06:25:19 2012] Source 38 has fewer than 100.000000 counts, skipping spectral fitting