[Thu Jul  5 23:55:26 2012] Detection parameters:
  Position = (379.0, 158.2) = 9 34 58.57 61 12 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.5 +/- 15.4
  Background counts = 9.8
  Rate = 0.004 +/- 0.0004

[Thu Jul  5 23:55:27 2012] Off-axis axis estimate = 11.73'
[Fri Jul  6 00:51:26 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 00:51:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul  6 00:51:26 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Fri Jul  6 00:51:26 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Fri Jul  6 00:51:26 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.29"
[Fri Jul  6 01:34:43 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jul  6 01:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src12.csv
[Fri Jul  6 01:34:43 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jul  6 01:34:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src12.csv
[Fri Jul  6 01:34:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:34:44 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jul  6 01:34:44 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jul  6 01:34:44 2012] Fit fullrun_mos1_xmm0085640201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Jul  6 02:24:47 2012] Spatial fit model total counts = 295.558000, observed total counts = 296.000000
[Fri Jul  6 02:24:47 2012] Offset between fit and detection position for source 3 = 0.320359 pixels
[Fri Jul  6 02:24:47 2012] 302.684900 total counts/ 212.640000 bgd. counts: snr = 6.174995
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.320359 pixels
  Position = (378.7, 158.1) = 9 34 58.76 61 12 32.8
  Extent = 6.8 (5.5-8.4)", rotation angle = 0
  Source counts = 90.0 +/- 17.4
  Background counts = 212.6
  Rate = 0.003 +/- 0.0005
[Fri Jul  6 02:24:47 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 02:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 02:24:47 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 02:24:47 2012] Source does appear to be extended
[Fri Jul  6 02:24:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 02:24:47 2012] Source is confused with source 24
[Fri Jul  6 03:15:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:15:56 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Fri Jul  6 03:15:56 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Fri Jul  6 03:15:56 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.85"
[Fri Jul  6 03:55:35 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul  6 03:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src11.csv
[Fri Jul  6 03:55:35 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul  6 03:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src11.csv
[Fri Jul  6 03:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul  6 03:55:36 2012] fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul  6 03:55:36 2012] Fit fullrun_mos1_xmm0085640201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jul  6 04:43:13 2012] Spatial fit model total counts = 286.895000, observed total counts = 285.000000
[Fri Jul  6 04:43:13 2012] Offset between fit and detection position for source 3 = 0.023860 pixels
[Fri Jul  6 04:43:13 2012] 293.402800 total counts/ 204.683000 bgd. counts: snr = 6.201256
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.023860 pixels
  Position = (378.7, 158.1) = 9 34 58.75 61 12 32.7
  Extent = 6.8 (5.4-8.3)", rotation angle = 0
  Source counts = 88.7 +/- 17.1
  Background counts = 204.7
  Rate = 0.003 +/- 0.0005
[Fri Jul  6 04:43:13 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:43:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:43:13 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:43:13 2012] Source does appear to be extended
[Fri Jul  6 04:43:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 05:28:14 2012] XMMSAS src. selection expression = ellipse(32902.373600, 13703.114400, 405.289812, 405.289812, 0.000000, X, Y)
[Fri Jul  6 05:28:14 2012] Writing source region out to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul  6 05:28:14 2012] Extracting stamp from image fullrun_mos1_xmm0085640201_pi300-10000_cl_sm2.00.img.gz, (355, 135) - (402, 181)
[Fri Jul  6 05:28:14 2012] XMMSAS bgd. selection expression = annulus(32902.373600, 13703.114400, 675.483019, 1350.966039, X, Y) && !ellipse(33576.342000, 14678.752000, 1948.400056, 1948.400056, 0.000000, X, Y)
[Fri Jul  6 05:28:14 2012] Writing fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src3.gif
[Fri Jul  6 05:31:10 2012] Mean detx,y = (12234.24, -4800.66) 
[Fri Jul  6 05:31:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 05:31:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 05:31:16 2012] Setting source spectrum file to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul  6 05:31:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul  6 05:48:47 2012] Not generating rmf since there are only 88 counts
[Fri Jul  6 05:48:47 2012] rmf not generated due to insufficient counts
[Fri Jul  6 06:25:15 2012] Updating aperture counts using extracted products
[Fri Jul  6 06:25:15 2012] Error reading totcts from fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul  6 06:25:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 06:25:15 2012] Using photon index=1.80, rate=0.00259, arf fullrun_mos1_xmm0085640201_pi300-10000_pass1_cl_src3.arf
[Fri Jul  6 06:25:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 06:25:15 2012] Updating source flux to 6.1e-14
[Fri Jul  6 06:25:19 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Jul  6 06:25:19 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting