[Tue Jun 25 11:48:10 2013] Detection parameters:
  Position = (288.4, 354.0) = 5 21 8.52 -25 19 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1030.6 +/- 37.9
  Background counts = 10.2
  Rate = 0.2 +/- 0.006

[Tue Jun 25 11:48:11 2013] Off-axis axis estimate = 4.09'
[Tue Jun 25 11:50:25 2013] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 11:50:25 2013] Initial guess for spatial extent in simple fitting = 8.47"
[Tue Jun 25 11:50:25 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.834
[Tue Jun 25 11:50:25 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.47"
[Tue Jun 25 12:47:07 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 25 12:47:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 25 12:47:07 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 25 12:47:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 25 12:47:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 12:47:08 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 25 12:47:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 12:47:08 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 25 12:47:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 12:47:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085640101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 13:32:51 2013] Source 3 is offset by 4.928336 and 1.281544 pixels which is larger than
2 X fitted extent = 0.974032 x 0.974032, not incorporating fit results
[Tue Jun 25 13:32:51 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:32:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:32:51 2013] Assessing source extent using major
[Tue Jun 25 13:32:51 2013] Source does appear to be extended
[Tue Jun 25 13:32:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:33:15 2013] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:33:15 2013] Initial guess for spatial extent in simple fitting = 8.47"
[Tue Jun 25 13:33:15 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.834
[Tue Jun 25 13:33:15 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.47"
[Tue Jun 25 14:25:24 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 25 14:25:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 14:25:24 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 25 14:25:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 14:25:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 14:25:25 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 25 14:25:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 14:25:25 2013] fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 25 14:25:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 14:25:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085640101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 15:06:32 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.524365 pixels away
[Tue Jun 25 15:06:32 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 15:06:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 15:06:32 2013] Assessing source extent using major
[Tue Jun 25 15:06:32 2013] Source does appear to be extended
[Tue Jun 25 15:06:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 15:06:45 2013] Counts = 1030.567139, rescaling region sizes by 2.000000
[Tue Jun 25 15:06:45 2013] XMMSAS src. selection expression = ellipse(25041.131256, 30746.226349, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 25 15:06:45 2013] Writing source region out to fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 25 15:06:45 2013] Extracting stamp from image fullrun_pn_xmm0085640101_pi300-10000_cl_sm2.00.img.gz, (213, 279) - (363, 429)
[Tue Jun 25 15:06:45 2013] XMMSAS bgd. selection expression = annulus(25041.131256, 30746.226349, 4350.000000, 8700.000000, X, Y) && !ellipse(27006.728450, 27704.681400, 465.928813, 465.928813, 0.000000, X, Y) && !ellipse(23152.837250, 36663.883087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.784943, 39768.719482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28850.636322, 38835.078430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31346.781400, 37607.925680, 1081.624031, 266.982408, 343.377039, X, Y) && !ellipse(27488.011566, 35843.179016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20781.650497, 33399.694489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29298.436218, 32440.952789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.800000, 31811.217200, 456.730206, 456.730206, 0.000000, X, Y) && !ellipse(33432.161200, 26432.520400, 360.695210, 360.695210, 0.000000, X, Y) && !ellipse(28576.406844, 25048.480000, 579.100817, 367.474411, 33.580365, X, Y) && !ellipse(33217.200800, 24497.448800, 583.228817, 583.228817, 0.000000, X, Y) && !ellipse(31045.367000, 23843.655200, 855.912025, 434.740013, 262.830768, X, Y) && !ellipse(26855.533000, 22815.219200, 467.963213, 467.963213, 0.000000, X, Y) && !ellipse(27570.100600, 22464.328800, 332.983210, 332.983210, 0.000000, X, Y)
[Tue Jun 25 15:06:45 2013] Writing fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 25 15:08:39 2013] Mean detx,y = (-1633.94, -3371.64) 
[Tue Jun 25 15:08:43 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 15:11:46 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 15:11:46 2013] Setting source spectrum file to fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 25 15:11:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 25 15:33:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 15:33:02 2013] rmf not generated due to insufficient counts
[Tue Jun 25 16:04:01 2013] Updating aperture counts using extracted products
[Tue Jun 25 16:04:01 2013] Total counts from fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1080.00
[Tue Jun 25 16:04:01 2013] Total counts from fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 6343.00
[Tue Jun 25 16:04:01 2013] Got source and background scale factors 4047457.000000, 147626679.000000
[Tue Jun 25 16:04:01 2013] User source parameters:
  Position = (288.4, 354.0) = 5 21 8.52 -25 19 12.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 906.1 +/- 33.9
  Background aperture counts = 173.9
  Rate = 0.1 +/- 0.004

[Tue Jun 25 16:04:01 2013] Updating counts from extracted products
[Tue Jun 25 16:04:01 2013] Set source signif. to 906.09/13.19 = 68.71
[Tue Jun 25 16:04:06 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 16:04:06 2013] Using photon index=1.80, rate=0.118, arf fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 25 16:04:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 16:04:06 2013] Updating source flux to 3.8e-13
[Tue Jun 25 16:04:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 25 16:04:18 2013] xmm0085640101/analysis//spectral/fullrun_pn_xmm0085640101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete