[Sat Aug 18 18:04:25 2012] Detection parameters:
  Position = (211.5, 474.9) = 3 20 29.74 41 17 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 14.9
  Background counts = 36.4
  Rate = 0.002 +/- 0.0004

[Sat Aug 18 18:04:25 2012] Off-axis axis estimate = 14.26'
[Sat Aug 18 20:16:24 2012] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 20:16:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 18 20:16:24 2012] Initial guess for spatial extent in simple fitting = 13.56"
[Sat Aug 18 20:16:24 2012] source mask rpix=3.1, npix_max = 52, mask sum = 53, frac = 1.013
[Sat Aug 18 20:16:24 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 13.56"
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src15.ximg exists
[Sat Aug 18 20:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src15.csv
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Aug 18 20:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src15.csv
[Sat Aug 18 20:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Aug 18 20:46:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Aug 18 20:46:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Aug 18 20:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 21:14:37 2012] Warning, spatial fit 15 centroid is now closest to src. 3
[Sat Aug 18 21:14:37 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 21:14:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 21:14:37 2012] Assessing source extent using major
[Sat Aug 18 21:14:37 2012] Source does appear to be extended
[Sat Aug 18 21:14:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 05:38:22 2012] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 05:38:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 05:38:22 2012] Initial guess for spatial extent in simple fitting = 13.56"
[Sun Aug 19 05:38:22 2012] source mask rpix=3.1, npix_max = 52, mask sum = 53, frac = 1.013
[Sun Aug 19 05:38:22 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 13.56"
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src14.ximg exists
[Sun Aug 19 06:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src14.csv
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Aug 19 06:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src14.csv
[Sun Aug 19 06:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Aug 19 06:07:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Aug 19 06:07:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Aug 19 06:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 06:27:24 2012] Warning, spatial fit 14 centroid is now closest to src. 3
[Sun Aug 19 06:27:24 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 06:27:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 06:27:24 2012] Assessing source extent using major
[Sun Aug 19 06:27:24 2012] Source does appear to be extended
[Sun Aug 19 06:27:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 07:41:55 2012] XMMSAS src. selection expression = ellipse(18352.448700, 41266.623291, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 19 07:41:55 2012] Writing source region out to fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src4_src.reg
[Sun Aug 19 07:41:55 2012] Extracting stamp from image fullrun_mos1_xmm0085590201_pi300-10000_cl_sm2.00.img.gz, (174, 437) - (249, 512)
[Sun Aug 19 07:41:55 2012] XMMSAS bgd. selection expression = annulus(18352.448700, 41266.623291, 1087.500000, 2175.000000, X, Y) && !ellipse(19050.968323, 41378.838104, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 19 07:41:55 2012] Writing fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src4.gif
[Sun Aug 19 07:46:28 2012] Mean detx,y = (12145.84, -11593.48) 
[Sun Aug 19 07:46:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 07:46:45 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 07:46:45 2012] Setting source spectrum file to fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Aug 19 07:46:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Aug 19 08:04:35 2012] Not generating rmf since there are only 80 counts
[Sun Aug 19 08:04:35 2012] rmf not generated due to insufficient counts
[Sun Aug 19 08:24:55 2012] Updating aperture counts using extracted products
[Sun Aug 19 08:24:55 2012] Error reading totcts from fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Aug 19 08:24:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 08:24:56 2012] Using photon index=1.80, rate=0.00191, arf fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src4.arf
[Sun Aug 19 08:24:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 08:24:56 2012] Updating source flux to 6.6e-14
[Sun Aug 19 08:24:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting