[Sat Aug 18 18:04:25 2012] Detection parameters:
  Position = (494.2, 273.8) = 3 18 40.91 41 2 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.9 +/- 11.4
  Background counts = 22.6
  Rate = 0.001 +/- 0.0003

[Sat Aug 18 18:04:25 2012] Off-axis axis estimate = 14.31'
[Sat Aug 18 20:16:24 2012] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 20:16:24 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Sat Aug 18 20:16:24 2012] source mask rpix=3.1, npix_max = 52, mask sum = 48, frac = 0.915
[Sat Aug 18 20:16:24 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 13.58"
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src22.ximg exists
[Sat Aug 18 20:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src22.csv
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Aug 18 20:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src22.csv
[Sat Aug 18 20:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Aug 18 20:46:37 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Aug 18 20:46:37 2012] Fit fullrun_mos1_xmm0085590201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sat Aug 18 21:14:37 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.824731 pixels away
[Sat Aug 18 21:14:37 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 21:14:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 21:14:37 2012] Assessing source extent using major
[Sat Aug 18 21:14:37 2012] Source does appear to be extended
[Sat Aug 18 21:14:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 05:38:22 2012] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 05:38:22 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Sun Aug 19 05:38:22 2012] source mask rpix=3.1, npix_max = 52, mask sum = 48, frac = 0.915
[Sun Aug 19 05:38:22 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 13.58"
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src21.ximg exists
[Sun Aug 19 06:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src21.csv
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Aug 19 06:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src21.csv
[Sun Aug 19 06:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Aug 19 06:07:09 2012] fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Aug 19 06:07:09 2012] Fit fullrun_mos1_xmm0085590201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Aug 19 06:27:24 2012] Spatial fit model total counts = 322.208000, observed total counts = 290.000000
[Sun Aug 19 06:27:24 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 19 06:27:24 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 06:27:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 06:27:24 2012] Assessing source extent using major
[Sun Aug 19 06:27:24 2012] Source does appear to be extended
[Sun Aug 19 06:27:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 07:41:55 2012] XMMSAS src. selection expression = ellipse(42948.154236, 23769.526215, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 19 07:41:55 2012] Writing source region out to fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src13_src.reg
[Sun Aug 19 07:41:55 2012] Extracting stamp from image fullrun_mos1_xmm0085590201_pi300-10000_cl_sm2.00.img.gz, (457, 236) - (532, 311)
[Sun Aug 19 07:41:55 2012] XMMSAS bgd. selection expression = annulus(42948.154236, 23769.526215, 1087.500000, 2175.000000, X, Y)
[Sun Aug 19 07:41:55 2012] Writing fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src13.gif
[Sun Aug 19 07:48:41 2012] Mean detx,y = (-319.29, 15744.63) 
[Sun Aug 19 07:48:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 07:49:11 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 07:49:11 2012] Setting source spectrum file to fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Aug 19 07:49:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Aug 19 08:05:26 2012] Not generating rmf since there are only 60 counts
[Sun Aug 19 08:05:26 2012] rmf not generated due to insufficient counts
[Sun Aug 19 08:24:55 2012] Updating aperture counts using extracted products
[Sun Aug 19 08:24:55 2012] Error reading totcts from fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Aug 19 08:24:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 08:24:56 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos1_xmm0085590201_pi300-10000_pass1_cl_src13.arf
[Sun Aug 19 08:24:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 08:24:56 2012] Updating source flux to 3.4e-14
[Sun Aug 19 08:24:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting