[Wed May 15 00:38:52 2013] Detection parameters:
  Position = (312.2, 346.6) = 17 31 59.26 -19 11 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.1 +/- 7.9
  Background counts = 10.1
  Rate = 0.006 +/- 0.002

[Wed May 15 00:38:52 2013] Off-axis axis estimate = 3.63'
[Wed May 15 00:39:03 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Wed May 15 00:39:03 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Wed May 15 00:39:03 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Wed May 15 00:39:03 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.24"
[Wed May 15 00:39:04 2013] fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 15 00:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_src4.csv
[Wed May 15 00:39:04 2013] fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 15 00:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_src4.csv
[Wed May 15 00:39:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:06 2013] fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 15 00:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 00:39:06 2013] fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 15 00:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 00:39:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:22 2013] Spatial fit model total counts = 158.434000, observed total counts = 125.000000
[Wed May 15 00:39:22 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 00:39:22 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:39:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:39:22 2013] Assessing source extent using major
[Wed May 15 00:39:22 2013] Source does appear to be extended
[Wed May 15 00:39:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:39:22 2013] Deleting source due to low Poisson probability 0.9