[Wed May 15 00:38:53 2013] Detection parameters:
  Position = (310.4, 318.9) = 17 31 59.80 -19 13 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3076.4 +/- 65.9
  Background counts = 4.6
  Rate = 0.4 +/- 0.008

[Wed May 15 00:38:53 2013] Off-axis axis estimate = 1.72'
[Wed May 15 00:39:16 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 15 00:39:16 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 15 00:39:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Wed May 15 00:39:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed May 15 00:39:16 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 15 00:39:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src1.csv
[Wed May 15 00:39:17 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 15 00:39:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src1.csv
[Wed May 15 00:39:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:19 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 15 00:39:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 15 00:39:19 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 15 00:39:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 15 00:39:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:26 2013] Source 2 is offset by -6.258291 and -7.794821 pixels which is larger than
2 X fitted extent = 0.837802 x 0.837802, not incorporating fit results
[Wed May 15 00:39:26 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:39:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:39:26 2013] Assessing source extent using major
[Wed May 15 00:39:26 2013] Source does appear to be extended
[Wed May 15 00:39:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:39:36 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 15 00:39:36 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 15 00:39:36 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Wed May 15 00:39:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 15 00:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src1.csv
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 15 00:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src1.csv
[Wed May 15 00:39:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 15 00:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 15 00:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 15 00:39:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:47 2013] Source 2 is offset by -3.301119 and 2.652834 pixels which is larger than
2 X fitted extent = 0.468156 x 0.468156, not incorporating fit results
[Wed May 15 00:39:47 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 149.402230 pixels away
[Wed May 15 00:39:47 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:39:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:39:47 2013] Assessing source extent using major
[Wed May 15 00:39:47 2013] Source does appear to be extended
[Wed May 15 00:39:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:42:57 2013] Counts = 3076.402100, rescaling region sizes by 2.000000
[Wed May 15 00:42:57 2013] XMMSAS src. selection expression = ellipse(26960.138641, 27696.460571, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 15 00:42:57 2013] Not overwriting source region fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_src.reg
[Wed May 15 00:42:57 2013] Extracting stamp from image fullrun_mos2_xmm0085582001_pi300-10000_cl_sm2.00.img.gz, (235, 244) - (385, 394)
[Wed May 15 00:42:57 2013] XMMSAS bgd. selection expression = annulus(26960.138641, 27696.460571, 4350.000000, 8700.000000, X, Y) && !ellipse(28572.550538, 26539.552600, 413.908812, 413.908812, 0.000000, X, Y) && !ellipse(17999.295400, 27022.273800, 292.283208, 292.283208, 0.000000, X, Y)
[Wed May 15 00:42:57 2013] Writing fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2.gif
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/events/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0085582001/products/events/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed May 15 00:42:58 2013] Mean detx,y = (106.57, 98.54) 
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/images/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_src.img and ../../xmm0085582001/products/images/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/spectra/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0085582001/products/spectra/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed May 15 00:42:58 2013] Setting source spectrum file to fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 15 00:42:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/lightcurves/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0085582001/products/lightcurves/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed May 15 00:43:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 00:43:01 2013] rmf not generated due to insufficient counts
[Wed May 15 00:43:01 2013] fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Wed May 15 00:43:26 2013] Updating aperture counts using extracted products
[Wed May 15 00:43:26 2013] Total counts from fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2925.00
[Wed May 15 00:43:26 2013] Total counts from fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_bgd.pi.gz = 798.00
[Wed May 15 00:43:26 2013] Got source and background scale factors 4999164.000000, 55231899.000000
[Wed May 15 00:43:26 2013] User source parameters:
  Position = (310.4, 318.9) = 17 31 59.80 -19 13 55.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2852.8 +/- 55.1
  Background aperture counts = 72.2
  Rate = 0.4 +/- 0.007

[Wed May 15 00:43:26 2013] Updating counts from extracted products
[Wed May 15 00:43:26 2013] Set source signif. to 2852.77/8.50 = 335.67
[Wed May 15 00:43:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 00:43:29 2013] Using photon index=1.80, rate=0.355, arf fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2.arf
[Wed May 15 00:43:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 00:43:29 2013] Updating source flux to 4.1e-12
[Wed May 15 00:43:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 00:43:33 2013] xmm0085582001/analysis//spectral/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete