[Wed May 15 00:38:53 2013] Detection parameters:
  Position = (131.9, 244.9) = 17 32 54.68 -19 19 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.0 +/- 7.7
  Background counts = 1.9
  Rate = 0.005 +/- 0.001

[Wed May 15 00:38:53 2013] Off-axis axis estimate = 12.69'
[Wed May 15 00:39:16 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Wed May 15 00:39:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 00:39:16 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Wed May 15 00:39:16 2013] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.741
[Wed May 15 00:39:16 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.77"
[Wed May 15 00:39:17 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 15 00:39:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 00:39:17 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 15 00:39:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 00:39:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:19 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 15 00:39:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 15 00:39:19 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 15 00:39:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 15 00:39:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:26 2013] Spatial fit model total counts = 53.194700, observed total counts = 48.000000
[Wed May 15 00:39:26 2013] Offset between fit and detection position for source 1 = 0.325440 pixels
[Wed May 15 00:39:26 2013] 55.001900 total counts/ 18.033600 bgd. counts: snr = 8.705391
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.325440 pixels
  Position = (131.9, 244.5) = 17 32 54.68 -19 19 18.2
  Extent = 8.2 (3.7-11.0)", rotation angle = 0
  Source counts = 37.0 +/- 7.4
  Background counts = 18.0
  Rate = 0.005 +/- 0.0009
[Wed May 15 00:39:26 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:39:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:39:26 2013] Assessing source extent using major axis lower bound
[Wed May 15 00:39:26 2013] Source does appear to be extended
[Wed May 15 00:39:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:39:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 00:39:36 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Wed May 15 00:39:36 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.873
[Wed May 15 00:39:36 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.23"
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 15 00:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 15 00:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 00:39:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 15 00:39:36 2013] fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 15 00:39:36 2013] Fit fullrun_mos2_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 15 00:39:47 2013] Spatial fit model total counts = 51.983400, observed total counts = 47.000000
[Wed May 15 00:39:47 2013] Offset between fit and detection position for source 1 = 0.077247 pixels
[Wed May 15 00:39:47 2013] 53.930800 total counts/ 15.987000 bgd. counts: snr = 9.489806
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077247 pixels
  Position = (131.9, 244.5) = 17 32 54.67 -19 19 18.5
  Extent = 8.0 (3.4-12.1)", rotation angle = 0
  Source counts = 37.9 +/- 7.3
  Background counts = 16.0
  Rate = 0.005 +/- 0.0009
[Wed May 15 00:39:47 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:39:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:39:47 2013] Assessing source extent using major axis lower bound
[Wed May 15 00:39:47 2013] Source does appear to be extended
[Wed May 15 00:39:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:42:57 2013] XMMSAS src. selection expression = ellipse(11425.535460, 21219.914800, 480.959414, 480.959414, 0.000000, X, Y)
[Wed May 15 00:42:57 2013] Not overwriting source region fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_src.reg
[Wed May 15 00:42:57 2013] Extracting stamp from image fullrun_mos2_xmm0085582001_pi300-10000_cl_sm2.00.img.gz, (104, 217) - (160, 272)
[Wed May 15 00:42:57 2013] XMMSAS bgd. selection expression = annulus(11425.535460, 21219.914800, 801.599023, 1603.198046, X, Y)
[Wed May 15 00:42:57 2013] Writing fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1.gif
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/events/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0085582001/products/events/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed May 15 00:42:58 2013] Mean detx,y = (15792.89, -5799.42) 
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/images/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_src.img and ../../xmm0085582001/products/images/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/spectra/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0085582001/products/spectra/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed May 15 00:42:58 2013] Setting source spectrum file to fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 15 00:42:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 15 00:42:58 2013] ../../xmm0085582001/products/lightcurves/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0085582001/products/lightcurves/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed May 15 00:43:01 2013] Not generating rmf since there are only 37 counts
[Wed May 15 00:43:01 2013] rmf not generated due to insufficient counts
[Wed May 15 00:43:01 2013] fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed May 15 00:43:26 2013] Updating aperture counts using extracted products
[Wed May 15 00:43:26 2013] Total counts from fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 38.00
[Wed May 15 00:43:26 2013] Total counts from fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_bgd.pi.gz = 27.00
[Wed May 15 00:43:26 2013] Got source and background scale factors 518779.000000, 2866501.000000
[Wed May 15 00:43:26 2013] User source parameters:
  Position = (131.9, 244.5) = 17 32 54.67 -19 19 18.5
  Extent = 8.0 (3.4-12.1)", rotation angle = 0
  Source aperture counts = 33.1 +/- 7.2
  Background aperture counts = 4.9
  Rate = 0.004 +/- 0.0009

[Wed May 15 00:43:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 00:43:29 2013] Using photon index=1.80, rate=0.00472, arf fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1.arf
[Wed May 15 00:43:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 00:43:29 2013] Updating source flux to 2.6e-13
[Wed May 15 00:43:32 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 00:43:33 2013] xmm0085582001/analysis//spectral/fullrun_mos2_xmm0085582001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete