[Wed May 15 00:38:52 2013] Detection parameters:
  Position = (327.8, 315.0) = 17 31 54.48 -19 14 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.2 +/- 8.5
  Background counts = 4.0
  Rate = 0.005 +/- 0.001

[Wed May 15 00:38:53 2013] Off-axis axis estimate = 2.44'
[Wed May 15 00:39:07 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Wed May 15 00:39:07 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Wed May 15 00:39:07 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Wed May 15 00:39:07 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.65"
[Wed May 15 00:39:08 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 15 00:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 00:39:09 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 15 00:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src3.csv
[Wed May 15 00:39:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:12 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 15 00:39:12 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 15 00:39:12 2013] Fit fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 15 00:39:24 2013] Source 6 is offset by 6.765661 and 3.035452 pixels which is larger than
2 X fitted extent = 0.879320 x 0.879320, not incorporating fit results
[Wed May 15 00:39:24 2013] Source 6 is offset by -8.190362 and 1.037452 pixels which is larger than
2 X fitted extent = 0.871090 x 0.871090, not incorporating fit results
[Wed May 15 00:39:24 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:39:24 2013] Assessing source extent using major
[Wed May 15 00:39:24 2013] Source does appear to be extended
[Wed May 15 00:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:39:34 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Wed May 15 00:39:34 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Wed May 15 00:39:34 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Wed May 15 00:39:34 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.65"
[Wed May 15 00:39:35 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 15 00:39:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 00:39:35 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 15 00:39:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src3.csv
[Wed May 15 00:39:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:39:36 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 15 00:39:36 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 15 00:39:36 2013] Fit fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 15 00:39:45 2013] Spatial fit model total counts = 117.994000, observed total counts = 118.000000
[Wed May 15 00:39:45 2013] Offset between fit and detection position for source 6 = 0.070868 pixels
[Wed May 15 00:39:45 2013] 113.118900 total counts/ 88.132800 bgd. counts: snr = 2.661520
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.070868 pixels
  Position = (327.8, 314.9) = 17 31 54.47 -19 14 12.4
  Extent = 4.2 (2.8-5.9)", rotation angle = 0
  Source counts = 25.0 +/- 10.6
  Background counts = 88.1
  Rate = 0.003 +/- 0.001
[Wed May 15 00:39:45 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:39:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:39:45 2013] Assessing source extent using major axis lower bound
[Wed May 15 00:39:45 2013] Source does appear to be extended
[Wed May 15 00:39:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:39:58 2013] XMMSAS src. selection expression = ellipse(28469.996640, 27351.133400, 249.789007, 249.789007, 0.000000, X, Y)
[Wed May 15 00:39:58 2013] Not overwriting source region fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_src.reg
[Wed May 15 00:39:58 2013] Extracting stamp from image fullrun_mos1_xmm0085582001_pi300-10000_cl_sm2.00.img.gz, (313, 301) - (342, 329)
[Wed May 15 00:39:58 2013] XMMSAS bgd. selection expression = annulus(28469.996640, 27351.133400, 416.315012, 832.630024, X, Y) && !ellipse(26968.690491, 27689.727417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28621.413800, 26550.055000, 570.521616, 396.436811, 325.497654, X, Y)
[Wed May 15 00:40:00 2013] Writing fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6.gif
[Wed May 15 00:40:02 2013] ../../xmm0085582001/products/events/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0085582001/products/events/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed May 15 00:40:02 2013] Mean detx,y = (-66.25, 1238.16) 
[Wed May 15 00:40:02 2013] ../../xmm0085582001/products/images/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_src.img and ../../xmm0085582001/products/images/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed May 15 00:40:02 2013] ../../xmm0085582001/products/spectra/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0085582001/products/spectra/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed May 15 00:40:02 2013] Setting source spectrum file to fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 15 00:40:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May 15 00:40:02 2013] ../../xmm0085582001/products/lightcurves/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0085582001/products/lightcurves/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed May 15 00:42:01 2013] Not generating rmf since there are only 24 counts
[Wed May 15 00:42:01 2013] rmf not generated due to insufficient counts
[Wed May 15 00:43:21 2013] Updating aperture counts using extracted products
[Wed May 15 00:43:21 2013] Total counts from fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 32.00
[Wed May 15 00:43:21 2013] Total counts from fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_bgd.pi.gz = 53.00
[Wed May 15 00:43:21 2013] Got source and background scale factors 193600.000000, 1230400.000000
[Wed May 15 00:43:21 2013] User source parameters:
  Position = (327.8, 314.9) = 17 31 54.47 -19 14 12.4
  Extent = 4.2 (2.8-5.9)", rotation angle = 0
  Source aperture counts = 23.7 +/- 6.7
  Background aperture counts = 8.3
  Rate = 0.003 +/- 0.0008

[Wed May 15 00:43:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 00:43:25 2013] Using photon index=1.80, rate=0.00311, arf fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6.arf
[Wed May 15 00:43:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 00:43:25 2013] Updating source flux to 4.8e-14
[Wed May 15 00:43:31 2013] Flag b found in src. 6 procflags, skipping spectral fitting
[Wed May 15 00:43:31 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 00:43:32 2013] xmm0085582001/analysis//spectral/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete