[Wed May 15 00:38:52 2013] Detection parameters: Position = (436.4, 334.5) = 17 31 21.13 -19 12 47.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 23.9 +/- 6.4 Background counts = 2.7 Rate = 0.005 +/- 0.001 [Wed May 15 00:38:53 2013] Off-axis axis estimate = 10.34' [Wed May 15 00:39:07 2013] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting [Wed May 15 00:39:07 2013] Initial guess for spatial extent in simple fitting = 11.60" [Wed May 15 00:39:07 2013] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.222 [Wed May 15 00:39:07 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.60" [Wed May 15 00:39:09 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src4.ximg exists [Wed May 15 00:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src4.csv [Wed May 15 00:39:09 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src4_1.ximg exists [Wed May 15 00:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src4.csv [Wed May 15 00:39:09 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 00:39:12 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Wed May 15 00:39:12 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Wed May 15 00:39:12 2013] Fit fullrun_mos1_xmm0085582001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Wed May 15 00:39:24 2013] Spatial fit model total counts = 41.997100, observed total counts = 42.000000 [Wed May 15 00:39:24 2013] Offset between fit and detection position for source 5 = 0.257816 pixels [Wed May 15 00:39:24 2013] 41.664700 total counts/ 24.985900 bgd. counts: snr = 3.336701 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.257816 pixels Position = (436.6, 334.4) = 17 31 21.06 -19 12 47.5 Extent = 5.2 (2.9-7.8)", rotation angle = 0 Source counts = 16.7 +/- 6.5 Background counts = 25.0 Rate = 0.002 +/- 0.0008 [Wed May 15 00:39:24 2013] Vigneting correction estimate = 1.000000 [Wed May 15 00:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 00:39:24 2013] Assessing source extent using major axis lower bound [Wed May 15 00:39:24 2013] Source does appear to be extended [Wed May 15 00:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 15 00:39:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 15 00:39:34 2013] Initial guess for spatial extent in simple fitting = 5.23" [Wed May 15 00:39:34 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.776 [Wed May 15 00:39:34 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 5.23" [Wed May 15 00:39:35 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src4.ximg exists [Wed May 15 00:39:35 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src4.csv [Wed May 15 00:39:35 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src4_1.ximg exists [Wed May 15 00:39:35 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src4.csv [Wed May 15 00:39:35 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 00:39:36 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Wed May 15 00:39:36 2013] fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Wed May 15 00:39:36 2013] Fit fullrun_mos1_xmm0085582001_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Wed May 15 00:39:45 2013] Spatial fit model total counts = 41.993900, observed total counts = 42.000000 [Wed May 15 00:39:45 2013] Offset between fit and detection position for source 5 = 0.001571 pixels [Wed May 15 00:39:45 2013] 41.660900 total counts/ 24.974600 bgd. counts: snr = 3.338957 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.001571 pixels Position = (436.6, 334.4) = 17 31 21.06 -19 12 47.5 Extent = 5.2 (1.6-7.8)", rotation angle = 0 Source counts = 16.7 +/- 6.5 Background counts = 25.0 Rate = 0.002 +/- 0.0008 [Wed May 15 00:39:45 2013] Vigneting correction estimate = 1.000000 [Wed May 15 00:39:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 00:39:45 2013] Assessing source extent using major axis lower bound [Wed May 15 00:39:45 2013] Source does appear to be extended [Wed May 15 00:39:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 15 00:40:00 2013] XMMSAS src. selection expression = ellipse(37934.985200, 29042.697800, 314.205820, 314.205820, 0.000000, X, Y) [Wed May 15 00:40:00 2013] Not overwriting source region fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_src.reg [Wed May 15 00:40:00 2013] Extracting stamp from image fullrun_mos1_xmm0085582001_pi300-10000_cl_sm2.00.img.gz, (419, 316) - (455, 352) [Wed May 15 00:40:00 2013] XMMSAS bgd. selection expression = annulus(37934.985200, 29042.697800, 523.676367, 1047.352734, X, Y) [Wed May 15 00:40:00 2013] Writing fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5.gif [Wed May 15 00:40:02 2013] ../../xmm0085582001/products/events/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0085582001/products/events/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create [Wed May 15 00:40:02 2013] Mean detx,y = (1259.76, 10772.43) [Wed May 15 00:40:02 2013] ../../xmm0085582001/products/images/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_src.img and ../../xmm0085582001/products/images/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create [Wed May 15 00:40:02 2013] ../../xmm0085582001/products/spectra/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0085582001/products/spectra/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create [Wed May 15 00:40:02 2013] Setting source spectrum file to fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Wed May 15 00:40:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_bgd.pi.gz [Wed May 15 00:40:02 2013] ../../xmm0085582001/products/lightcurves/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0085582001/products/lightcurves/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create [Wed May 15 00:42:08 2013] Not generating rmf since there are only 16 counts [Wed May 15 00:42:08 2013] rmf not generated due to insufficient counts [Wed May 15 00:43:21 2013] Updating aperture counts using extracted products [Wed May 15 00:43:22 2013] Total counts from fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 21.00 [Wed May 15 00:43:22 2013] Total counts from fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_bgd.pi.gz = 24.00 [Wed May 15 00:43:22 2013] Got source and background scale factors 316800.000000, 2452284.000000 [Wed May 15 00:43:23 2013] User source parameters: Position = (436.6, 334.4) = 17 31 21.06 -19 12 47.5 Extent = 5.2 (1.6-7.8)", rotation angle = 0 Source aperture counts = 17.9 +/- 5.7 Background aperture counts = 3.1 Rate = 0.002 +/- 0.0007 [Wed May 15 00:43:25 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 15 00:43:25 2013] Using photon index=1.80, rate=0.00207, arf fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5.arf [Wed May 15 00:43:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 15 00:43:25 2013] Updating source flux to 4.9e-14 [Wed May 15 00:43:31 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 15 00:43:32 2013] xmm0085582001/analysis//spectral/fullrun_mos1_xmm0085582001_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete