[Tue May  7 16:20:46 2013] Detection parameters:
  Position = (190.7, 226.5) = 17 32 36.21 -19 20 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.5 +/- 6.7
  Background counts = 1.9
  Rate = 0.004 +/- 0.0009

[Tue May  7 16:20:46 2013] Off-axis axis estimate = 9.39'
[Tue May  7 16:45:58 2013] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Tue May  7 16:45:58 2013] Initial guess for spatial extent in simple fitting = 11.12"
[Tue May  7 16:45:58 2013] source mask rpix=2.6, npix_max = 37, mask sum = 37, frac = 0.990
[Tue May  7 16:45:58 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.12"
[Tue May  7 16:56:31 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_src9.ximg exists
[Tue May  7 16:56:31 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue May  7 16:56:31 2013] Fit fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_src9 appears to have run properly
[Tue May  7 16:56:31 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue May  7 16:56:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue May  7 16:56:31 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue May  7 16:56:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue May  7 16:56:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085581401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 16:56:35 2013] Spatial fit model total counts = 45.073500, observed total counts = 40.000000
[Tue May  7 16:56:35 2013] Offset between fit and detection position for source 3 = 0.425048 pixels
[Tue May  7 16:56:35 2013] 46.257300 total counts/ 25.261400 bgd. counts: snr = 4.177397
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.425048 pixels
  Position = (191.0, 226.9) = 17 32 36.13 -19 20 39.1
  Extent = 3.5 (2.8-4.9)", rotation angle = 0
  Source counts = 21.0 +/- 6.8
  Background counts = 25.3
  Rate = 0.003 +/- 0.0009
[Tue May  7 16:56:35 2013] Vigneting correction estimate = 1.000000
[Tue May  7 16:56:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 16:56:35 2013] Assessing source extent using major axis lower bound
[Tue May  7 16:56:35 2013] Source does appear to be extended
[Tue May  7 16:56:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 17:09:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 17:09:03 2013] Initial guess for spatial extent in simple fitting = 3.46"
[Tue May  7 17:09:03 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.597
[Tue May  7 17:09:03 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 3.46"
[Tue May  7 17:18:41 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_src9.ximg exists
[Tue May  7 17:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_src9.csv
[Tue May  7 17:18:41 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May  7 17:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_src9.csv
[Tue May  7 17:18:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:18:41 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May  7 17:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue May  7 17:18:41 2013] fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May  7 17:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue May  7 17:18:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085581401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 17:18:44 2013] Spatial fit model total counts = 45.261400, observed total counts = 40.000000
[Tue May  7 17:18:44 2013] Offset between fit and detection position for source 3 = 0.014931 pixels
[Tue May  7 17:18:44 2013] 46.830100 total counts/ 25.500800 bgd. counts: snr = 4.223765
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.014931 pixels
  Position = (191.0, 226.9) = 17 32 36.13 -19 20 39.1
  Extent = 3.5 (2.3-4.9)", rotation angle = 0
  Source counts = 21.3 +/- 6.8
  Background counts = 25.5
  Rate = 0.003 +/- 0.0009
[Tue May  7 17:18:44 2013] Vigneting correction estimate = 1.000000
[Tue May  7 17:18:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 17:18:44 2013] Assessing source extent using major axis lower bound
[Tue May  7 17:18:44 2013] Source does appear to be extended
[Tue May  7 17:18:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 17:30:42 2013] XMMSAS src. selection expression = ellipse(16566.206600, 19690.470000, 212.014806, 212.014806, 0.000000, X, Y)
[Tue May  7 17:30:42 2013] Writing source region out to fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3_src.reg
[Tue May  7 17:30:42 2013] Extracting stamp from image fullrun_mos2_xmm0085581401_pi300-10000_cl_sm2.00.img.gz, (179, 215) - (203, 239)
[Tue May  7 17:30:43 2013] XMMSAS bgd. selection expression = annulus(16566.206600, 19690.470000, 353.358010, 706.716020, X, Y)
[Tue May  7 17:30:43 2013] Writing fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3.gif
[Tue May  7 17:33:46 2013] Mean detx,y = (11052.26, -7036.84) 
[Tue May  7 17:33:47 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 17:33:57 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 17:33:57 2013] Setting source spectrum file to fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May  7 17:33:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May  7 17:34:50 2013] Not generating rmf since there are only 21 counts
[Tue May  7 17:34:50 2013] rmf not generated due to insufficient counts
[Tue May  7 17:35:09 2013] Updating aperture counts using extracted products
[Tue May  7 17:35:09 2013] Total counts from fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 19.00
[Tue May  7 17:35:09 2013] Total counts from fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 12.00
[Tue May  7 17:35:09 2013] Got source and background scale factors 87186.000000, 1034296.000000
[Tue May  7 17:35:09 2013] User source parameters:
  Position = (191.0, 226.9) = 17 32 36.13 -19 20 39.1
  Extent = 3.5 (2.3-4.9)", rotation angle = 0
  Source aperture counts = 18.0 +/- 5.4
  Background aperture counts = 1.0
  Rate = 0.002 +/- 0.0007

[Tue May  7 17:35:09 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 17:35:09 2013] Using photon index=1.80, rate=0.00281, arf fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3.arf
[Tue May  7 17:35:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  7 17:35:09 2013] Getting flux using calc_pl_flux failed
[Tue May  7 17:35:11 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May  7 17:35:12 2013] xmm0085581401/analysis//spectral/fullrun_mos2_xmm0085581401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete