[Wed May 8 23:41:49 2013] Detection parameters: Position = (307.0, 314.2) = 17 55 17.63 -30 59 5.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 103.9 +/- 13.7 Background counts = 27.6 Rate = 0.03 +/- 0.004 [Wed May 8 23:41:49 2013] Off-axis axis estimate = 1.30' [Wed May 8 23:43:00 2013] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting [Wed May 8 23:43:00 2013] Initial guess for spatial extent in simple fitting = 7.08" [Wed May 8 23:43:00 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884 [Wed May 8 23:43:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.08" [Wed May 8 23:50:39 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_src1.ximg exists [Wed May 8 23:50:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_src1.csv [Wed May 8 23:50:39 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_src1_1.ximg exists [Wed May 8 23:50:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_src1.csv [Wed May 8 23:50:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 23:50:39 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed May 8 23:50:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed May 8 23:50:39 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 8 23:50:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed May 8 23:50:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0085581101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 23:56:04 2013] Source 1 is offset by -3.444614 and -3.332253 pixels which is larger than 2 X fitted extent = 0.932336 x 0.932336, not incorporating fit results [Wed May 8 23:56:04 2013] Vigneting correction estimate = 1.000000 [Wed May 8 23:56:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 23:56:04 2013] Assessing source extent using major [Wed May 8 23:56:04 2013] Source does appear to be extended [Wed May 8 23:56:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 23:56:09 2013] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting [Wed May 8 23:56:09 2013] Initial guess for spatial extent in simple fitting = 7.08" [Wed May 8 23:56:09 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884 [Wed May 8 23:56:09 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.08" [Thu May 9 00:02:44 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_src1.ximg exists [Thu May 9 00:02:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_src1.csv [Thu May 9 00:02:44 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_src1_1.ximg exists [Thu May 9 00:02:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_src1.csv [Thu May 9 00:02:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 00:02:44 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Thu May 9 00:02:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_tfrozen_src1.csv [Thu May 9 00:02:44 2013] fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Thu May 9 00:02:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_tfrozen_src1.csv [Thu May 9 00:02:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0085581101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 9 00:10:01 2013] Source 1 is offset by -2.966752 and 0.221683 pixels which is larger than 2 X fitted extent = 0.814487 x 0.814487, not incorporating fit results [Thu May 9 00:10:01 2013] Vigneting correction estimate = 1.000000 [Thu May 9 00:10:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 9 00:10:01 2013] Assessing source extent using major [Thu May 9 00:10:01 2013] Source does appear to be extended [Thu May 9 00:10:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 9 00:10:06 2013] XMMSAS src. selection expression = ellipse(26658.848572, 27289.726013, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 9 00:10:06 2013] Writing source region out to fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1_src.reg [Thu May 9 00:10:06 2013] Extracting stamp from image fullrun_pn_xmm0085581101_pi300-10000_cl_sm2.00.img.gz, (269, 277) - (344, 352) [Thu May 9 00:10:06 2013] XMMSAS bgd. selection expression = annulus(26658.848572, 27289.726013, 1087.500000, 2175.000000, X, Y) && !ellipse(27306.088959, 28930.640320, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 9 00:10:06 2013] Writing fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1.gif [Thu May 9 00:10:11 2013] Mean detx,y = (-1805.76, 2817.76) [Thu May 9 00:10:13 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 9 00:10:34 2013] Binned source spectrum to 10 counts/bin [Thu May 9 00:10:34 2013] Setting source spectrum file to fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu May 9 00:10:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu May 9 00:13:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 9 00:13:04 2013] rmf not generated due to insufficient counts [Thu May 9 00:23:43 2013] Updating aperture counts using extracted products [Thu May 9 00:23:43 2013] Total counts from fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 194.00 [Thu May 9 00:23:43 2013] Total counts from fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1013.00 [Thu May 9 00:23:43 2013] Got source and background scale factors 1023064.000000, 8629006.000000 [Thu May 9 00:23:43 2013] User source parameters: Position = (307.0, 314.2) = 17 55 17.63 -30 59 5.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 73.9 +/- 15.0 Background aperture counts = 120.1 Rate = 0.02 +/- 0.003 [Thu May 9 00:23:43 2013] Updating counts from extracted products [Thu May 9 00:23:43 2013] Set source signif. to 73.90/10.96 = 6.74 [Thu May 9 00:23:44 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 9 00:23:44 2013] Using photon index=1.80, rate=0.016, arf fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1.arf [Thu May 9 00:23:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 9 00:23:44 2013] Updating source flux to 9.1e-14 [Thu May 9 00:23:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 9 00:23:49 2013] xmm0085581101/analysis//spectral/fullrun_pn_xmm0085581101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete