[Sun Jun  2 06:19:57 2013] Detection parameters:
  Position = (467.8, 210.3) = 11 54 15.21 -65 42 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.2 +/- 6.9
  Background counts = 1.9
  Rate = 0.004 +/- 0.0009

[Sun Jun  2 06:19:57 2013] Off-axis axis estimate = 13.84'
[Sun Jun  2 06:25:13 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 06:25:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 06:25:13 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Sun Jun  2 06:25:13 2013] source mask rpix=3.1, npix_max = 50, mask sum = 44, frac = 0.864
[Sun Jun  2 06:25:13 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.35"
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  2 06:34:05 2013] Fit fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  2 06:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  2 06:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  2 06:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:40:44 2013] Spatial fit model total counts = 48.199000, observed total counts = 45.000000
[Sun Jun  2 06:40:44 2013] Offset between fit and detection position for source 4 = 0.811333 pixels
[Sun Jun  2 06:40:44 2013] 49.746700 total counts/ 22.476200 bgd. counts: snr = 5.752169
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.811333 pixels
  Position = (467.8, 211.1) = 11 54 15.19 -65 42 17.2
  Extent = 8.6 (6.7-11.9)" x 3.9 (3.3-5.8)", rotation angle = 129 (112-145) degrees
  Source counts = 27.3 +/- 7.1
  Background counts = 22.5
  Rate = 0.004 +/- 0.001
[Sun Jun  2 06:40:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:40:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:40:44 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 06:40:44 2013] Source does appear to be extended
[Sun Jun  2 06:40:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Sun Jun  2 06:44:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 06:44:35 2013] Initial guess for spatial extent in simple fitting = 6.25"
[Sun Jun  2 06:44:35 2013] source mask rpix=1.4, npix_max = 15, mask sum = 15, frac = 0.999
[Sun Jun  2 06:44:35 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.25"
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  2 06:52:30 2013] Fit fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  2 06:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  2 06:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  2 06:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:59:53 2013] Spatial fit model total counts = 44.578500, observed total counts = 44.000000
[Sun Jun  2 06:59:53 2013] Offset between fit and detection position for source 4 = 0.050581 pixels
[Sun Jun  2 06:59:53 2013] 45.707000 total counts/ 17.842100 bgd. counts: snr = 6.596818
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.050581 pixels
  Position = (467.8, 211.2) = 11 54 15.16 -65 42 17.2
  Extent = 8.8 (6.7-12.3)" x 4.0 (2.3-5.6)", rotation angle = 309 (292-327) degrees
  Source counts = 27.9 +/- 6.8
  Background counts = 17.8
  Rate = 0.004 +/- 0.0009
[Sun Jun  2 06:59:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:59:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:59:53 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 06:59:53 2013] Source does appear to be extended
[Sun Jun  2 06:59:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Sun Jun  2 07:04:41 2013] XMMSAS src. selection expression = ellipse(40653.361920, 18321.974200, 528.535215, 240.214807, 308.620403, X, Y)
[Sun Jun  2 07:04:41 2013] Writing source region out to fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun  2 07:04:41 2013] Extracting stamp from image fullrun_mos1_xmm0085580801_pi300-10000_cl_sm2.00.img.gz, (437, 181) - (498, 242)
[Sun Jun  2 07:04:41 2013] XMMSAS bgd. selection expression = annulus(40653.361920, 18321.974200, 880.892025, 1761.784051, X, Y)
[Sun Jun  2 07:04:41 2013] Writing fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4.gif
[Sun Jun  2 07:05:21 2013] Mean detx,y = (-12593.74, 10863.74) 
[Sun Jun  2 07:05:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 07:05:45 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 07:05:46 2013] Setting source spectrum file to fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun  2 07:05:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun  2 07:06:05 2013] Not generating rmf since there are only 27 counts
[Sun Jun  2 07:06:05 2013] rmf not generated due to insufficient counts
[Sun Jun  2 07:07:54 2013] Updating aperture counts using extracted products
[Sun Jun  2 07:07:54 2013] Total counts from fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 23.00
[Sun Jun  2 07:07:54 2013] Total counts from fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4_bgd.pi.gz = 35.00
[Sun Jun  2 07:07:54 2013] Got source and background scale factors 263093.000000, 2944336.000000
[Sun Jun  2 07:07:54 2013] User source parameters:
  Position = (467.8, 211.2) = 11 54 15.16 -65 42 17.2
  Extent = 8.8 (6.7-12.3)" x 4.0 (2.3-5.6)", rotation angle = 309 (292-327) degrees
  Source aperture counts = 19.9 +/- 5.9
  Background aperture counts = 3.1
  Rate = 0.003 +/- 0.0008

[Sun Jun  2 07:07:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 07:07:54 2013] Using photon index=1.80, rate=0.0038, arf fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4.arf
[Sun Jun  2 07:07:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 07:07:55 2013] Updating source flux to 2.8e-13
[Sun Jun  2 07:07:56 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 07:07:57 2013] xmm0085580801/analysis//spectral/fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete