[Sun Jun  2 06:19:57 2013] Detection parameters:
  Position = (349.7, 306.6) = 11 55 38.56 -65 35 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.7 +/- 6.1
  Background counts = 2.9
  Rate = 0.005 +/- 0.001

[Sun Jun  2 06:19:57 2013] Off-axis axis estimate = 3.77'
[Sun Jun  2 06:25:13 2013] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 06:25:13 2013] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Jun  2 06:25:13 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.946
[Sun Jun  2 06:25:13 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.31"
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  2 06:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  2 06:34:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 06:34:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  2 06:34:05 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  2 06:34:05 2013] Fit fullrun_mos1_xmm0085580801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  2 06:40:44 2013] Spatial fit model total counts = 38.191800, observed total counts = 35.000000
[Sun Jun  2 06:40:44 2013] Offset between fit and detection position for source 2 = 0.263684 pixels
[Sun Jun  2 06:40:44 2013] 36.853900 total counts/ 14.392800 bgd. counts: snr = 5.920500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.263684 pixels
  Position = (349.6, 306.9) = 11 55 38.65 -65 35 23.5
  Extent = 5.8 (2.8-11.4)", rotation angle = 0
  Source counts = 22.5 +/- 6.1
  Background counts = 14.4
  Rate = 0.003 +/- 0.0008
[Sun Jun  2 06:40:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:40:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:40:44 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 06:40:44 2013] Source does appear to be extended
[Sun Jun  2 06:40:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 06:44:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 06:44:35 2013] Initial guess for spatial extent in simple fitting = 5.84"
[Sun Jun  2 06:44:35 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.884
[Sun Jun  2 06:44:35 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  2 06:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  2 06:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 06:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  2 06:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 06:52:30 2013] fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  2 06:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun  2 06:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085580801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:59:53 2013] Spatial fit model total counts = 52.324000, observed total counts = 42.000000
[Sun Jun  2 06:59:53 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 06:59:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:59:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:59:53 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 06:59:53 2013] Source does appear to be extended
[Sun Jun  2 06:59:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 07:04:41 2013] XMMSAS src. selection expression = ellipse(30367.969000, 26647.481440, 350.314210, 350.314210, 0.000000, X, Y)
[Sun Jun  2 07:04:41 2013] Writing source region out to fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  2 07:04:41 2013] Extracting stamp from image fullrun_mos1_xmm0085580801_pi300-10000_cl_sm2.00.img.gz, (329, 287) - (370, 327)
[Sun Jun  2 07:04:41 2013] XMMSAS bgd. selection expression = annulus(30367.969000, 26647.481440, 583.857017, 1167.714034, X, Y)
[Sun Jun  2 07:04:41 2013] Writing fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2.gif
[Sun Jun  2 07:04:44 2013] Mean detx,y = (-1870.08, 3071.21) 
[Sun Jun  2 07:04:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 07:05:03 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 07:05:03 2013] Setting source spectrum file to fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  2 07:05:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun  2 07:05:48 2013] Not generating rmf since there are only 22 counts
[Sun Jun  2 07:05:48 2013] rmf not generated due to insufficient counts
[Sun Jun  2 07:07:53 2013] Updating aperture counts using extracted products
[Sun Jun  2 07:07:54 2013] Total counts from fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 24.00
[Sun Jun  2 07:07:54 2013] Total counts from fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2_bgd.pi.gz = 28.00
[Sun Jun  2 07:07:54 2013] Got source and background scale factors 317853.000000, 1784610.000000
[Sun Jun  2 07:07:54 2013] User source parameters:
  Position = (349.6, 306.9) = 11 55 38.65 -65 35 23.5
  Extent = 5.8 (2.8-11.4)", rotation angle = 0
  Source aperture counts = 19.0 +/- 6.0
  Background aperture counts = 5.0
  Rate = 0.003 +/- 0.0008

[Sun Jun  2 07:07:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 07:07:54 2013] Using photon index=1.80, rate=0.00307, arf fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2.arf
[Sun Jun  2 07:07:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 07:07:54 2013] Updating source flux to 6.6e-14
[Sun Jun  2 07:07:56 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Sun Jun  2 07:07:56 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 07:07:57 2013] xmm0085580801/analysis//spectral/fullrun_mos1_xmm0085580801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete