[Thu Aug 23 19:43:32 2012] Detection parameters:
  Position = (357.6, 501.0) = 17 53 55.19 -29 49 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.1 +/- 7.4
  Background counts = 3.7
  Rate = 0.005 +/- 0.001

[Thu Aug 23 19:43:32 2012] Off-axis axis estimate = 15.30'
[Thu Aug 23 19:55:18 2012] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 19:55:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 19:55:18 2012] Initial guess for spatial extent in simple fitting = 14.08"
[Thu Aug 23 19:55:18 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.003
[Thu Aug 23 19:55:18 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 14.08"
[Thu Aug 23 20:01:57 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_src4.ximg exists
[Thu Aug 23 20:01:57 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Aug 23 20:01:57 2012] Fit fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_src4 appears to have run properly
[Thu Aug 23 20:01:57 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Aug 23 20:01:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Aug 23 20:01:57 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Aug 23 20:01:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Aug 23 20:01:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085580501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:03:39 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 19.456670 pixels away
[Thu Aug 23 20:03:39 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 20:03:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 20:03:39 2012] Assessing source extent using major
[Thu Aug 23 20:03:39 2012] Source does appear to be extended
[Thu Aug 23 20:03:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 20:15:38 2012] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 20:15:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 23 20:15:38 2012] Initial guess for spatial extent in simple fitting = 14.08"
[Thu Aug 23 20:15:38 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.003
[Thu Aug 23 20:15:38 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.08"
[Thu Aug 23 20:23:06 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_src4.ximg exists
[Thu Aug 23 20:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_src4.csv
[Thu Aug 23 20:23:06 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Aug 23 20:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_src4.csv
[Thu Aug 23 20:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 20:23:06 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Aug 23 20:23:06 2012] fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Aug 23 20:23:06 2012] Fit fullrun_mos1_xmm0085580501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Aug 23 20:24:46 2012] Spatial fit model total counts = 86.516800, observed total counts = 81.000000
[Thu Aug 23 20:24:46 2012] Offset between fit and detection position for source 5 = 0.336905 pixels
[Thu Aug 23 20:24:46 2012] 84.497300 total counts/ 68.550600 bgd. counts: snr = 1.926040
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.336905 pixels
  Position = (357.3, 500.9) = 17 53 55.29 -29 49 42.4
  Extent = 4.5 (3.5-6.5)", rotation angle = 0
  Source counts = 15.9 +/- 9.2
  Background counts = 68.6
  Rate = 0.002 +/- 0.001
[Thu Aug 23 20:24:46 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 20:24:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 20:24:46 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 20:24:46 2012] Source does appear to be extended
[Thu Aug 23 20:24:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 20:29:09 2012] XMMSAS src. selection expression = ellipse(31036.383800, 43528.208600, 267.024608, 267.024608, 0.000000, X, Y)
[Thu Aug 23 20:29:09 2012] Writing source region out to fullrun_mos1_xmm0085580501_pi300-10000_pass1_cl_src5_src.reg
[Thu Aug 23 20:29:09 2012] Extracting stamp from image fullrun_mos1_xmm0085580501_pi300-10000_cl_sm2.00.img.gz, (342, 486) - (373, 516)
[Thu Aug 23 20:29:09 2012] XMMSAS bgd. selection expression = annulus(31036.383800, 43528.208600, 445.041013, 890.082026, X, Y)
[Thu Aug 23 20:29:09 2012] Writing fullrun_mos1_xmm0085580501_pi300-10000_pass1_cl_src5.gif
[Thu Aug 23 20:29:39 2012] Mean detx,y = (15731.76, 5143.38) 
[Thu Aug 23 20:29:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 20:29:50 2012] grppha failed
[Thu Aug 23 20:29:50 2012] Setting source spectrum file to fullrun_mos1_xmm0085580501_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Aug 23 20:29:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085580501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug 23 20:30:01 2012] Not generating rmf since there are only 15 counts
[Thu Aug 23 20:30:01 2012] rmf not generated due to insufficient counts
[Thu Aug 23 20:30:24 2012] Updating aperture counts using extracted products
[Thu Aug 23 20:30:24 2012] Error reading totcts from fullrun_mos1_xmm0085580501_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Aug 23 20:30:24 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 20:30:25 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug 23 20:30:26 2012] xmm0085580501/analysis//spectral/fullrun_mos1_xmm0085580501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete