[Wed Jun 27 10:12:34 2012] Detection parameters:
  Position = (174.3, 374.3) = 17 56 11.22 -30 57 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.6 +/- 22.1
  Background counts = 30.2
  Rate = 0.04 +/- 0.003

[Wed Jun 27 10:12:34 2012] Off-axis axis estimate = 10.55'
[Wed Jun 27 10:17:00 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:17:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 10:17:00 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Wed Jun 27 10:17:00 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Wed Jun 27 10:17:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.70"
[Wed Jun 27 10:28:56 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 10:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 10:28:56 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 10:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 10:28:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:28:56 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 10:28:56 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 10:28:56 2012] Fit fullrun_pn_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 27 10:42:30 2012] Spatial fit model total counts = 408.483000, observed total counts = 382.000000
[Wed Jun 27 10:42:30 2012] Offset between fit and detection position for source 1 = 0.222517 pixels
[Wed Jun 27 10:42:30 2012] 411.071000 total counts/ 233.965000 bgd. counts: snr = 11.578647
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.222517 pixels
  Position = (174.4, 374.5) = 17 56 11.19 -30 57 45.6
  Extent = 7.2 (6.2-8.5)", rotation angle = 0
  Source counts = 177.1 +/- 20.3
  Background counts = 234.0
  Rate = 0.03 +/- 0.004
[Wed Jun 27 10:42:30 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 10:42:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 10:42:30 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 10:42:30 2012] Source does appear to be extended
[Wed Jun 27 10:42:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 10:42:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:42:38 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Wed Jun 27 10:42:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.344
[Wed Jun 27 10:42:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.21"
[Wed Jun 27 10:52:29 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 27 10:52:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 10:52:29 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 27 10:52:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 10:52:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:52:29 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 27 10:52:29 2012] fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 27 10:52:29 2012] Fit fullrun_pn_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 27 11:09:12 2012] Spatial fit model total counts = 303.609000, observed total counts = 286.000000
[Wed Jun 27 11:09:12 2012] Offset between fit and detection position for source 1 = 0.031514 pixels
[Wed Jun 27 11:09:12 2012] 304.619000 total counts/ 130.271000 bgd. counts: snr = 15.275418
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031514 pixels
  Position = (174.4, 374.5) = 17 56 11.18 -30 57 45.7
  Extent = 7.1 (5.8-8.5)", rotation angle = 0
  Source counts = 174.3 +/- 17.5
  Background counts = 130.3
  Rate = 0.03 +/- 0.003
[Wed Jun 27 11:09:12 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:09:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:09:12 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 11:09:12 2012] Source does appear to be extended
[Wed Jun 27 11:09:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:09:22 2012] XMMSAS src. selection expression = ellipse(15123.546200, 32529.905400, 427.794612, 427.794612, 0.000000, X, Y)
[Wed Jun 27 11:09:22 2012] Writing source region out to fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 27 11:09:22 2012] Extracting stamp from image fullrun_pn_xmm0085580201_pi300-10000_cl_sm2.00.img.gz, (150, 350) - (199, 399)
[Wed Jun 27 11:09:22 2012] XMMSAS bgd. selection expression = annulus(15123.546200, 32529.905400, 712.991021, 1425.982041, X, Y)
[Wed Jun 27 11:09:22 2012] Writing fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1.gif
[Wed Jun 27 11:09:40 2012] Mean detx,y = (-11241.11, -6065.38) 
[Wed Jun 27 11:09:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 11:09:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 11:09:59 2012] Setting source spectrum file to fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 11:09:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 27 11:26:48 2012] Updating aperture counts using extracted products
[Wed Jun 27 11:26:48 2012] Error reading totcts from fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 11:26:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 11:26:48 2012] Using photon index=1.80, rate=0.0322, arf fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 11:26:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 11:26:48 2012] Updating source flux to 2.1e-13
[Wed Jun 27 11:27:05 2012] Reading fit data from xmm0085580201/analysis//spectral/fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 27 11:27:05 2012] Spectral fit parameter nH value = 2.60037e+21
[Wed Jun 27 11:27:05 2012] Spectral fit parameter PhoIndex value = 1.1837
[Wed Jun 27 11:27:05 2012] Failed to get F(0.3-8.0) from xmm0085580201/analysis//spectral/fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 27 11:27:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 11:27:05 2012] Using Nh = 2.6e+21, photon index=1.18, rate=0.0322, arf fullrun_pn_xmm0085580201_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 11:27:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 11:27:05 2012] Updating source flux to 4.9e-13