[Wed Jun 27 10:13:11 2012] Detection parameters:
  Position = (174.1, 373.6) = 17 56 11.28 -30 57 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 12.1
  Background counts = 6.4
  Rate = 0.01 +/- 0.001

[Wed Jun 27 10:13:11 2012] Off-axis axis estimate = 10.53'
[Wed Jun 27 10:34:27 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:34:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 10:34:27 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Wed Jun 27 10:34:27 2012] source mask rpix=2.7, npix_max = 40, mask sum = 38, frac = 0.935
[Wed Jun 27 10:34:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.69"
[Wed Jun 27 10:42:25 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 10:42:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 10:42:25 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 10:42:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 10:42:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:42:26 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 10:42:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 27 10:42:26 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 10:42:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 27 10:42:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085580201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:42:32 2012] Spatial fit model total counts = 217.191000, observed total counts = 196.000000
[Wed Jun 27 10:42:32 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 27 10:42:32 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 10:42:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 10:42:32 2012] Assessing source extent using major
[Wed Jun 27 10:42:32 2012] Source does appear to be extended
[Wed Jun 27 10:42:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:01:46 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:01:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 11:01:46 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Wed Jun 27 11:01:46 2012] source mask rpix=2.7, npix_max = 40, mask sum = 38, frac = 0.935
[Wed Jun 27 11:01:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.69"
[Wed Jun 27 11:09:09 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 27 11:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 11:09:09 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 27 11:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 11:09:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:09:09 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 27 11:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 27 11:09:09 2012] fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 27 11:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 27 11:09:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085580201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:09:15 2012] Spatial fit model total counts = 216.845000, observed total counts = 196.000000
[Wed Jun 27 11:09:15 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 27 11:09:15 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:09:15 2012] Assessing source extent using major
[Wed Jun 27 11:09:15 2012] Source does appear to be extended
[Wed Jun 27 11:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:23:14 2012] XMMSAS src. selection expression = ellipse(15098.847031, 32451.256958, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 27 11:23:14 2012] Writing source region out to fullrun_mos2_xmm0085580201_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 27 11:23:14 2012] Extracting stamp from image fullrun_mos2_xmm0085580201_pi300-10000_cl_sm2.00.img.gz, (137, 336) - (212, 411)
[Wed Jun 27 11:23:14 2012] XMMSAS bgd. selection expression = annulus(15098.847031, 32451.256958, 1087.500000, 2175.000000, X, Y) && !ellipse(17395.008771, 32964.083632, 385.450427, 270.007340, 113.546431, X, Y)
[Wed Jun 27 11:23:14 2012] Writing fullrun_mos2_xmm0085580201_pi300-10000_pass1_cl_src2.gif
[Wed Jun 27 11:23:46 2012] Mean detx,y = (11444.79, 5757.35) 
[Wed Jun 27 11:23:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 11:24:07 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 11:24:07 2012] Setting source spectrum file to fullrun_mos2_xmm0085580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 27 11:24:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085580201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 27 11:25:54 2012] Not generating rmf since there are only 96 counts
[Wed Jun 27 11:25:54 2012] rmf not generated due to insufficient counts
[Wed Jun 27 11:26:49 2012] Updating aperture counts using extracted products
[Wed Jun 27 11:26:49 2012] Error reading totcts from fullrun_mos2_xmm0085580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 27 11:26:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 11:26:49 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0085580201_pi300-10000_pass1_cl_src2.arf
[Wed Jun 27 11:26:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 11:26:49 2012] Updating source flux to 3.1e-13
[Wed Jun 27 11:26:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 27 11:26:52 2012] xmm0085580201/analysis//spectral/fullrun_mos2_xmm0085580201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete