[Fri Aug 17 07:54:35 2012] Detection parameters:
  Position = (431.1, 256.1) = 11 54 31.58 -65 35 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18.9 +/- 5.6
  Background counts = 1.4
  Rate = 0.003 +/- 0.0008

[Fri Aug 17 07:54:35 2012] Off-axis axis estimate = 10.09'
[Fri Aug 17 08:08:15 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 08:08:15 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Fri Aug 17 08:08:15 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.889
[Fri Aug 17 08:08:15 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.48"
[Fri Aug 17 08:12:59 2012] fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 17 08:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 08:12:59 2012] fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 17 08:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 08:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 08:12:59 2012] fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 17 08:12:59 2012] fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 17 08:12:59 2012] Fit fullrun_mos2_xmm0085580101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 17 08:13:03 2012] Spatial fit model total counts = 26.785100, observed total counts = 26.000000
[Fri Aug 17 08:13:03 2012] Offset between fit and detection position for source 2 = 0.296948 pixels
[Fri Aug 17 08:13:03 2012] 26.261540 total counts/ 16.907900 bgd. counts: snr = 2.274761
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.296948 pixels
  Position = (430.8, 256.2) = 11 54 31.78 -65 35 44.1
  Extent = 3.2 (2.9-7.2)", rotation angle = 0
  Source counts = 9.4 +/- 5.1
  Background counts = 16.9
  Rate = 0.001 +/- 0.0007
[Fri Aug 17 08:13:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 08:13:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 08:13:03 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 08:13:03 2012] Source does appear to be extended
[Fri Aug 17 08:13:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 08:27:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 08:27:21 2012] Initial guess for spatial extent in simple fitting = 3.16"
[Fri Aug 17 08:27:21 2012] Spatial fitting skipped for pass 1: source                                 has 9.4 net counts, is at off-axis angle 10.1'
[Fri Aug 17 08:30:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 08:30:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 08:30:54 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 08:30:54 2012] Source does appear to be extended
[Fri Aug 17 08:30:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 08:37:42 2012] XMMSAS src. selection expression = ellipse(37429.652660, 22242.750400, 189.439805, 189.439805, 0.000000, X, Y)
[Fri Aug 17 08:37:42 2012] Writing source region out to fullrun_mos2_xmm0085580101_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 17 08:37:42 2012] Extracting stamp from image fullrun_mos2_xmm0085580101_pi300-10000_cl_sm2.00.img.gz, (420, 245) - (442, 267)
[Fri Aug 17 08:37:42 2012] XMMSAS bgd. selection expression = annulus(37429.652660, 22242.750400, 315.733009, 631.466018, X, Y)
[Fri Aug 17 08:37:42 2012] Writing fullrun_mos2_xmm0085580101_pi300-10000_pass1_cl_src2.gif
[Fri Aug 17 08:38:03 2012] Mean detx,y = (11125.18, 5272.64) 
[Fri Aug 17 08:38:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 08:38:08 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 08:38:08 2012] Setting source spectrum file to fullrun_mos2_xmm0085580101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 08:38:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085580101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 17 08:38:28 2012] Not generating rmf since there are only 9 counts
[Fri Aug 17 08:38:28 2012] rmf not generated due to insufficient counts
[Fri Aug 17 08:38:40 2012] Updating aperture counts using extracted products
[Fri Aug 17 08:38:40 2012] Error reading totcts from fullrun_mos2_xmm0085580101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 08:38:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 08:38:40 2012] Using photon index=1.80, rate=0.00133, arf fullrun_mos2_xmm0085580101_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 08:38:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 08:38:40 2012] Updating source flux to 7e-14
[Fri Aug 17 08:38:42 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 17 08:38:43 2012] xmm0085580101/analysis//spectral/fullrun_mos2_xmm0085580101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete