[Sun Jun 10 10:13:00 2012] Detection parameters:
  Position = (468.2, 287.0) = 17 26 51.93 -5 3 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.7 +/- 10.3
  Background counts = 13.4
  Rate = 0.006 +/- 0.001

[Sun Jun 10 10:13:00 2012] Off-axis axis estimate = 12.33'
[Sun Jun 10 10:14:55 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:14:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 10:14:55 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Sun Jun 10 10:14:55 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Sun Jun 10 10:14:55 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.60"
[Sun Jun 10 10:29:58 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 10 10:29:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 10:29:58 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 10 10:29:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 10:29:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 10:29:59 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 10 10:29:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 10 10:29:59 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 10 10:29:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 10 10:29:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 10:47:42 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.539364 pixels away
[Sun Jun 10 10:47:42 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 10:47:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 10:47:42 2012] Assessing source extent using major
[Sun Jun 10 10:47:42 2012] Source does appear to be extended
[Sun Jun 10 10:47:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 10:47:52 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:47:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 10:47:52 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Sun Jun 10 10:47:52 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Sun Jun 10 10:47:52 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.60"
[Sun Jun 10 11:03:27 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 10 11:03:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 11:03:27 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 10 11:03:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 11:03:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 11:03:27 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 10 11:03:27 2012] fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 10 11:03:27 2012] Fit fullrun_pn_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 10 11:19:51 2012] Spatial fit model total counts = 96.278300, observed total counts = 89.000000
[Sun Jun 10 11:19:51 2012] Offset between fit and detection position for source 5 = 0.784862 pixels
[Sun Jun 10 11:19:51 2012] 94.861000 total counts/ 67.206600 bgd. counts: snr = 3.373326
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.784862 pixels
  Position = (467.5, 287.4) = 17 26 52.13 -5 3 52.3
  Extent = 5.9 (3.8-9.6)", rotation angle = 0
  Source counts = 27.7 +/- 9.7
  Background counts = 67.2
  Rate = 0.004 +/- 0.001
[Sun Jun 10 11:19:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 11:19:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 11:19:51 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 11:19:51 2012] Source does appear to be extended
[Sun Jun 10 11:19:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 11:20:01 2012] XMMSAS src. selection expression = ellipse(40622.856960, 24951.790860, 354.918010, 354.918010, 0.000000, X, Y)
[Sun Jun 10 11:20:01 2012] Writing source region out to fullrun_pn_xmm0085280201_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 10 11:20:01 2012] Extracting stamp from image fullrun_pn_xmm0085280201_pi300-10000_cl_sm2.00.img.gz, (447, 267) - (488, 308)
[Sun Jun 10 11:20:01 2012] XMMSAS bgd. selection expression = annulus(40622.856960, 24951.790860, 591.530017, 1183.060034, X, Y)
[Sun Jun 10 11:20:01 2012] Writing fullrun_pn_xmm0085280201_pi300-10000_pass1_cl_src5.gif
[Sun Jun 10 11:23:07 2012] Mean detx,y = (-15448.41, -1704.59) 
[Sun Jun 10 11:23:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 11:23:45 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 11:23:46 2012] Setting source spectrum file to fullrun_pn_xmm0085280201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 11:23:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085280201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 10 11:27:12 2012] Not generating rmf since there are only 27 counts
[Sun Jun 10 11:27:12 2012] rmf not generated due to insufficient counts
[Sun Jun 10 11:38:05 2012] Updating aperture counts using extracted products
[Sun Jun 10 11:38:05 2012] Error reading totcts from fullrun_pn_xmm0085280201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 11:38:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 11:38:06 2012] Using photon index=1.80, rate=0.00404, arf fullrun_pn_xmm0085280201_pi300-10000_pass1_cl_src5.arf
[Sun Jun 10 11:38:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 11:38:06 2012] Updating source flux to 4.9e-14
[Sun Jun 10 11:38:10 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 10 11:38:11 2012] xmm0085280201/analysis//spectral/fullrun_pn_xmm0085280201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete