[Sun Jun 10 10:13:26 2012] Detection parameters:
  Position = (303.2, 323.2) = 17 27 39.96 -5 1 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.1 +/- 8.4
  Background counts = 5.3
  Rate = 0.004 +/- 0.0009

[Sun Jun 10 10:13:26 2012] Off-axis axis estimate = 1.83'
[Sun Jun 10 10:29:59 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:29:59 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jun 10 10:29:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Sun Jun 10 10:29:59 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.34"
[Sun Jun 10 10:42:34 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 10 10:42:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_src3.csv
[Sun Jun 10 10:42:34 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 10 10:42:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_src3.csv
[Sun Jun 10 10:42:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 10:42:34 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 10 10:42:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 10 10:42:34 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 10 10:42:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 10 10:42:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085280201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 10:47:43 2012] Spatial fit model total counts = 105.100000, observed total counts = 80.000000
[Sun Jun 10 10:47:43 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 10 10:47:43 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 10:47:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 10:47:43 2012] Assessing source extent using major
[Sun Jun 10 10:47:43 2012] Source does appear to be extended
[Sun Jun 10 10:47:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 11:03:27 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 11:03:27 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun Jun 10 11:03:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Sun Jun 10 11:03:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.34"
[Sun Jun 10 11:13:39 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 10 11:13:39 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 10 11:13:39 2012] Fit fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Jun 10 11:13:39 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 10 11:13:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 10 11:13:39 2012] fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 10 11:13:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 10 11:13:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085280201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 11:19:53 2012] Spatial fit model total counts = 79.901800, observed total counts = 80.000000
[Sun Jun 10 11:19:53 2012] Offset between fit and detection position for source 3 = 0.231272 pixels
[Sun Jun 10 11:19:53 2012] 79.198100 total counts/ 54.340600 bgd. counts: snr = 3.372060
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.231272 pixels
  Position = (303.0, 323.2) = 17 27 40.03 -5 1 16.7
  Extent = 5.0" x 4.7", rotation angle = 51
  Source counts = 24.9 +/- 8.9
  Background counts = 54.3
  Rate = 0.002 +/- 0.0008
[Sun Jun 10 11:19:53 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 11:19:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 11:19:53 2012] Assessing source extent using major
[Sun Jun 10 11:19:53 2012] Source does appear to be extended
[Sun Jun 10 11:19:53 2012] Computing asymmetry using major and minor axis, asym = 1.06
[Sun Jun 10 11:34:24 2012] XMMSAS src. selection expression = ellipse(26310.823078, 28065.584453, 297.536178, 281.205212, 50.995837, X, Y)
[Sun Jun 10 11:34:24 2012] Writing source region out to fullrun_mos1_xmm0085280201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 10 11:34:24 2012] Extracting stamp from image fullrun_mos1_xmm0085280201_pi300-10000_cl_sm2.00.img.gz, (286, 306) - (320, 340)
[Sun Jun 10 11:34:24 2012] XMMSAS bgd. selection expression = annulus(26310.823078, 28065.584453, 495.893630, 991.787261, X, Y)
[Sun Jun 10 11:34:24 2012] Writing fullrun_mos1_xmm0085280201_pi300-10000_pass1_cl_src3.gif
[Sun Jun 10 11:35:02 2012] Mean detx,y = (-3479.73, -2056.63) 
[Sun Jun 10 11:35:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 11:35:12 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 11:35:12 2012] Setting source spectrum file to fullrun_mos1_xmm0085280201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 10 11:35:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085280201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 10 11:36:07 2012] Not generating rmf since there are only 24 counts
[Sun Jun 10 11:36:07 2012] rmf not generated due to insufficient counts
[Sun Jun 10 11:38:06 2012] Updating aperture counts using extracted products
[Sun Jun 10 11:38:06 2012] Error reading totcts from fullrun_mos1_xmm0085280201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 10 11:38:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 11:38:06 2012] Using photon index=1.80, rate=0.00236, arf fullrun_mos1_xmm0085280201_pi300-10000_pass1_cl_src3.arf
[Sun Jun 10 11:38:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 11:38:06 2012] Updating source flux to 4.1e-14
[Sun Jun 10 11:38:08 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sun Jun 10 11:38:08 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 10 11:38:09 2012] xmm0085280201/analysis//spectral/fullrun_mos1_xmm0085280201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete