[Sun May  5 07:10:01 2013] Detection parameters:
  Position = (315.6, 209.0) = 12 1 46.62 -18 56 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1032.8 +/- 40.2
  Background counts = 58.8
  Rate = 0.04 +/- 0.001

[Sun May  5 07:10:02 2013] Off-axis axis estimate = 6.60'
[Sun May  5 07:10:33 2013] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:10:33 2013] Initial guess for spatial extent in simple fitting = 9.73"
[Sun May  5 07:10:33 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Sun May  5 07:10:33 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 9.73"
[Sun May  5 07:10:34 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_src46.ximg exists
[Sun May  5 07:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_src46.csv
[Sun May  5 07:10:34 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun May  5 07:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_src46.csv
[Sun May  5 07:10:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:10:35 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun May  5 07:10:35 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun May  5 07:10:35 2013] Fit fullrun_pn_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Sun May  5 07:10:52 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 11.491683 pixels away
[Sun May  5 07:10:52 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:10:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:10:52 2013] Assessing source extent using major
[Sun May  5 07:10:52 2013] Source does appear to be extended
[Sun May  5 07:10:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:11:25 2013] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:11:25 2013] Initial guess for spatial extent in simple fitting = 9.73"
[Sun May  5 07:11:25 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.001
[Sun May  5 07:11:25 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 9.73"
[Sun May  5 07:11:26 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_src41.ximg exists
[Sun May  5 07:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_src41.csv
[Sun May  5 07:11:26 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun May  5 07:11:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_src41.csv
[Sun May  5 07:11:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:27 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun May  5 07:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun May  5 07:11:27 2013] fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun May  5 07:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun May  5 07:11:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:40 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 12.975800 pixels away
[Sun May  5 07:11:41 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:41 2013] Assessing source extent using major
[Sun May  5 07:11:41 2013] Source does appear to be extended
[Sun May  5 07:11:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:12:10 2013] Counts = 1032.798462, rescaling region sizes by 2.000000
[Sun May  5 07:12:10 2013] XMMSAS src. selection expression = ellipse(27411.610443, 18133.230896, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May  5 07:12:10 2013] Not overwriting source region fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49_src.reg
[Sun May  5 07:12:10 2013] Extracting stamp from image fullrun_pn_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (241, 134) - (391, 284)
[Sun May  5 07:12:10 2013] XMMSAS bgd. selection expression = annulus(27411.610443, 18133.230896, 4350.000000, 8700.000000, X, Y) && !ellipse(25389.348969, 22260.858917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.124176, 23406.602295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25266.272430, 23695.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24780.225840, 23594.175600, 1016.056029, 1016.056029, 0.000000, X, Y) && !ellipse(25838.772000, 24295.316000, 400.547212, 400.547212, 0.000000, X, Y) && !ellipse(34971.129333, 27645.141510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28273.517914, 27486.665466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.586426, 27312.763702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34927.143463, 27283.191986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24946.142000, 27010.529200, 385.029611, 385.029611, 0.000000, X, Y) && !ellipse(31998.879791, 26607.481720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26416.249640, 26286.061600, 407.942412, 407.942412, 0.000000, X, Y) && !ellipse(34378.030304, 23790.931061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27800.324000, 22462.984000, 1269.096037, 1269.096037, 0.000000, X, Y) && !ellipse(21393.249600, 22723.826800, 372.552011, 372.552011, 0.000000, X, Y) && !ellipse(18783.495361, 22638.966949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24146.144775, 22433.499542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26188.772980, 22720.540070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.553528, 21630.512482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.526276, 21375.080078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26803.736176, 21374.485352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22784.666992, 19959.608292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18734.903015, 19654.570648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30815.839000, 17361.111200, 399.320011, 399.320011, 0.000000, X, Y) && !ellipse(20148.979584, 15743.493454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19525.634460, 14816.787338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20058.011642, 13603.460190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30766.555908, 12244.893646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28666.499420, 11324.831741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27419.754400, 11282.854000, 524.516015, 524.516015, 0.000000, X, Y)
[Sun May  5 07:12:10 2013] Writing fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49.gif
[Sun May  5 07:14:57 2013] Mean detx,y = (1483.36, -6027.13) 
[Sun May  5 07:15:01 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 07:16:58 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 07:16:59 2013] Setting source spectrum file to fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun May  5 07:16:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sun May  5 10:10:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 10:10:43 2013] rmf not generated due to insufficient counts
[Sun May  5 10:17:48 2013] Updating aperture counts using extracted products
[Sun May  5 10:17:48 2013] Total counts from fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 2360.00
[Sun May  5 10:17:48 2013] Total counts from fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49_bgd.pi.gz = 38211.00
[Sun May  5 10:17:48 2013] Got source and background scale factors 4840725.000000, 132515915.000000
[Sun May  5 10:17:48 2013] User source parameters:
  Position = (315.6, 209.0) = 12 1 46.62 -18 56 41.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 964.2 +/- 49.6
  Background aperture counts = 1395.8
  Rate = 0.02 +/- 0.001

[Sun May  5 10:17:48 2013] Updating counts from extracted products
[Sun May  5 10:17:48 2013] Set source signif. to 964.18/37.36 = 25.81
[Sun May  5 10:17:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:17:50 2013] Using photon index=1.80, rate=0.0238, arf fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49.arf
[Sun May  5 10:17:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:17:50 2013] Updating source flux to 8.2e-14
[Sun May  5 10:18:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:18:19 2013] xmm0085220201/analysis//spectral/fullrun_pn_xmm0085220201_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete