[Sun May  5 07:10:06 2013] Detection parameters:
  Position = (259.1, 190.5) = 12 2 3.94 -18 58 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.5 +/- 10.2
  Background counts = 17.6
  Rate = 0.002 +/- 0.0003

[Sun May  5 07:10:06 2013] Off-axis axis estimate = 8.33'
[Sun May  5 07:10:38 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:10:38 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Sun May  5 07:10:38 2013] source mask rpix=2.4, npix_max = 34, mask sum = 20, frac = 0.580
[Sun May  5 07:10:38 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 10.59"
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src36.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src36.csv
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src36.csv
[Sun May  5 07:10:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:10:40 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun May  5 07:10:40 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun May  5 07:10:40 2013] Fit fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sun May  5 07:11:10 2013] Spatial fit model total counts = 210.220000, observed total counts = 191.000000
[Sun May  5 07:11:10 2013] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 07:11:10 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:10 2013] Assessing source extent using major
[Sun May  5 07:11:10 2013] Source does appear to be extended
[Sun May  5 07:11:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:11:28 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:11:28 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Sun May  5 07:11:28 2013] source mask rpix=2.4, npix_max = 34, mask sum = 20, frac = 0.580
[Sun May  5 07:11:28 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 10.59"
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src34.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src34.csv
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src34_1.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src34.csv
[Sun May  5 07:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:30 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sun May  5 07:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sun May  5 07:11:30 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sun May  5 07:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sun May  5 07:11:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:55 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 14.018739 pixels away
[Sun May  5 07:11:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:55 2013] Assessing source extent using major
[Sun May  5 07:11:55 2013] Source does appear to be extended
[Sun May  5 07:11:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:16:51 2013] XMMSAS src. selection expression = ellipse(22497.305206, 16526.449646, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 10:16:51 2013] Not overwriting source region fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_src.reg
[Sun May  5 10:16:51 2013] Extracting stamp from image fullrun_mos2_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (222, 153) - (297, 228)
[Sun May  5 10:16:52 2013] XMMSAS bgd. selection expression = annulus(22497.305206, 16526.449646, 1087.500000, 2175.000000, X, Y) && !ellipse(19508.497574, 14807.350037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20163.199400, 15801.966300, 412.288012, 221.989606, 36.506100, X, Y) && !ellipse(19996.924728, 13642.542221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19478.446625, 18104.143723, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 10:16:52 2013] Writing fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48.gif
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Sun May  5 10:16:53 2013] Mean detx,y = (-6306.62, 4953.50) 
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_src.img and ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Sun May  5 10:16:53 2013] Setting source spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun May  5 10:16:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Sun May  5 10:16:57 2013] Not generating rmf since there are only 54 counts
[Sun May  5 10:16:57 2013] rmf not generated due to insufficient counts
[Sun May  5 10:16:57 2013] fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48.arf exists, delete to re-create
[Sun May  5 10:17:58 2013] Updating aperture counts using extracted products
[Sun May  5 10:17:58 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 146.00
[Sun May  5 10:17:58 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_bgd.pi.gz = 963.00
[Sun May  5 10:17:58 2013] Got source and background scale factors 1162630.000000, 10249940.000000
[Sun May  5 10:17:58 2013] User source parameters:
  Position = (259.1, 190.5) = 12 2 3.94 -18 58 2.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 36.8 +/- 13.1
  Background aperture counts = 109.2
  Rate = 0.0007 +/- 0.0003

[Sun May  5 10:17:58 2013] Updating counts from extracted products
[Sun May  5 10:17:58 2013] Set source signif. to 36.77/10.45 = 3.52
[Sun May  5 10:18:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:18:00 2013] Using photon index=1.80, rate=0.000708, arf fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48.arf
[Sun May  5 10:18:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:18:00 2013] Updating source flux to 1.4e-14
[Sun May  5 10:18:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:18:14 2013] xmm0085220201/analysis//spectral/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete