[Sun May  5 07:10:05 2013] Detection parameters:
  Position = (298.7, 248.3) = 12 1 51.80 -18 53 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.6 +/- 12.3
  Background counts = 23.8
  Rate = 0.001 +/- 0.0003

[Sun May  5 07:10:06 2013] Off-axis axis estimate = 3.64'
[Sun May  5 07:10:38 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:10:38 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Sun May  5 07:10:38 2013] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.045
[Sun May  5 07:10:38 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 8.25"
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src38.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src38.csv
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src38.csv
[Sun May  5 07:10:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:10:40 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun May  5 07:10:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun May  5 07:10:40 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun May  5 07:10:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun May  5 07:10:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:10 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 10.214655 pixels away
[Sun May  5 07:11:10 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:10 2013] Assessing source extent using major
[Sun May  5 07:11:10 2013] Source does appear to be extended
[Sun May  5 07:11:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:11:28 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:11:28 2013] Initial guess for spatial extent in simple fitting = 8.25"
[Sun May  5 07:11:28 2013] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.045
[Sun May  5 07:11:28 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 8.25"
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src36.ximg exists
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun May  5 07:11:29 2013] Fit fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src36 appears to have run properly
[Sun May  5 07:11:30 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun May  5 07:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sun May  5 07:11:30 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun May  5 07:11:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sun May  5 07:11:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:55 2013] Warning, spatial fit 36 centroid is now closest to src. 1
[Sun May  5 07:11:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:55 2013] Assessing source extent using major
[Sun May  5 07:11:55 2013] Source does appear to be extended
[Sun May  5 07:11:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:16:52 2013] XMMSAS src. selection expression = ellipse(25939.712646, 21551.308975, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 10:16:52 2013] Not overwriting source region fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_src.reg
[Sun May  5 10:16:52 2013] Extracting stamp from image fullrun_mos2_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (261, 211) - (336, 286)
[Sun May  5 10:16:52 2013] XMMSAS bgd. selection expression = annulus(25939.712646, 21551.308975, 1087.500000, 2175.000000, X, Y) && !ellipse(25421.998000, 22274.260000, 662.525619, 604.746417, 349.448000, X, Y) && !ellipse(26045.394000, 23252.520000, 273.338408, 273.338408, 0.000000, X, Y) && !ellipse(24609.739441, 23782.028748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.894000, 23648.818000, 1151.368033, 1151.368033, 0.000000, X, Y) && !ellipse(26741.504944, 23636.365875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.001648, 21317.407532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.023621, 24162.890045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24010.612000, 21002.628000, 1344.496039, 1344.496039, 0.000000, X, Y) && !ellipse(24017.317444, 22233.331573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27080.626526, 22615.695618, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26417.347107, 24572.882324, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 10:16:52 2013] Writing fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35.gif
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Sun May  5 10:16:53 2013] Mean detx,y = (-941.04, 2065.60) 
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_src.img and ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Sun May  5 10:16:53 2013] Setting source spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun May  5 10:16:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Sun May  5 10:16:57 2013] Not generating rmf since there are only 65 counts
[Sun May  5 10:16:57 2013] rmf not generated due to insufficient counts
[Sun May  5 10:16:57 2013] fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35.arf exists, delete to re-create
[Sun May  5 10:17:58 2013] Updating aperture counts using extracted products
[Sun May  5 10:17:58 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 392.00
[Sun May  5 10:17:58 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_bgd.pi.gz = 564.00
[Sun May  5 10:17:58 2013] Got source and background scale factors 1140128.000000, 2825220.000000
[Sun May  5 10:17:58 2013] User source parameters:
  Position = (298.7, 248.3) = 12 1 51.80 -18 53 49.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 164.4 +/- 20.8
  Background aperture counts = 227.6
  Rate = 0.003 +/- 0.0004

[Sun May  5 10:17:58 2013] Updating counts from extracted products
[Sun May  5 10:17:58 2013] Set source signif. to 164.40/15.09 = 10.90
[Sun May  5 10:18:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:18:00 2013] Using photon index=1.80, rate=0.00316, arf fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35.arf
[Sun May  5 10:18:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:18:00 2013] Updating source flux to 3.5e-14
[Sun May  5 10:18:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:18:14 2013] xmm0085220201/analysis//spectral/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete