[Sun May  5 07:10:04 2013] Detection parameters:
  Position = (299.8, 268.0) = 12 1 51.46 -18 52 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1663.2 +/- 49.2
  Background counts = 24.7
  Rate = 0.03 +/- 0.001

[Sun May  5 07:10:06 2013] Off-axis axis estimate = 2.21'
[Sun May  5 07:10:38 2013] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:10:38 2013] Initial guess for spatial extent in simple fitting = 7.53"
[Sun May  5 07:10:38 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Sun May  5 07:10:38 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.53"
[Sun May  5 07:10:38 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src2.ximg exists
[Sun May  5 07:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src2.csv
[Sun May  5 07:10:38 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May  5 07:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src2.csv
[Sun May  5 07:10:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May  5 07:10:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:10 2013] Warning, spatial fit 2 centroid is now closest to src. 4
[Sun May  5 07:11:10 2013] Spatial fit model total counts = 4292.090000, observed total counts = 4020.000000
[Sun May  5 07:11:10 2013] Offset between fit and detection position for source 2 = 0.171614 pixels
[Sun May  5 07:11:10 2013] Warning, changing simple spatial fit ID from 2 to 5
[Sun May  5 07:11:10 2013] 4131.849000 total counts/ 3609.610000 bgd. counts: snr = 8.692389
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.171614 pixels
  Position = (299.9, 267.8) = 12 1 51.43 -18 52 24.9
  Extent = 3.4 (3.1-3.8)", rotation angle = 0
  Source counts = 522.2 +/- 64.3
  Background counts = 3609.6
  Rate = 0.01 +/- 0.001
[Sun May  5 07:11:10 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:10 2013] Assessing source extent using major axis lower bound
[Sun May  5 07:11:10 2013] Source does appear to be extended
[Sun May  5 07:11:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:11:10 2013] Source is confused with source 4
[Sun May  5 07:11:10 2013] Source is confused with source 53
[Sun May  5 07:11:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 07:11:28 2013] Initial guess for spatial extent in simple fitting = 3.42"
[Sun May  5 07:11:28 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.605
[Sun May  5 07:11:28 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 3.42"
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src2.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src2.csv
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src2.csv
[Sun May  5 07:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 07:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:55 2013] Spatial fit model total counts = 3637.900000, observed total counts = 3247.000000
[Sun May  5 07:11:55 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 07:11:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:55 2013] Assessing source extent using major axis lower bound
[Sun May  5 07:11:55 2013] Source does appear to be extended
[Sun May  5 07:11:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:16:50 2013] XMMSAS src. selection expression = ellipse(26045.394000, 23252.520000, 205.003806, 205.003806, 0.000000, X, Y)
[Sun May  5 10:16:50 2013] Not overwriting source region fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_src.reg
[Sun May  5 10:16:50 2013] Extracting stamp from image fullrun_mos2_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (288, 256) - (312, 280)
[Sun May  5 10:16:50 2013] XMMSAS bgd. selection expression = annulus(26045.394000, 23252.520000, 341.673010, 683.346020, X, Y) && !ellipse(25421.998000, 22274.260000, 662.525619, 604.746417, 349.448000, X, Y) && !ellipse(25850.058000, 24299.672200, 386.961611, 386.961611, 0.000000, X, Y) && !ellipse(24609.739441, 23782.028748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.894000, 23648.818000, 1151.368033, 1151.368033, 0.000000, X, Y) && !ellipse(26741.504944, 23636.365875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.023621, 24162.890045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27080.626526, 22615.695618, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26417.347107, 24572.882324, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 10:16:50 2013] Writing fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2.gif
[Sun May  5 10:16:52 2013] ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun May  5 10:16:52 2013] Mean detx,y = (21.76, 773.98) 
[Sun May  5 10:16:52 2013] ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun May  5 10:16:52 2013] ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun May  5 10:16:52 2013] Setting source spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May  5 10:16:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May  5 10:16:52 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun May  5 10:16:57 2013] fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Sun May  5 10:16:57 2013] fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Sun May  5 10:17:55 2013] Updating aperture counts using extracted products
[Sun May  5 10:17:55 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 859.00
[Sun May  5 10:17:55 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 0.00
[Sun May  5 10:17:55 2013] Got source and background scale factors 129600.000000, 0.000000
[Sun May  5 10:17:55 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun May  5 10:17:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:17:59 2013] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2.arf
[Sun May  5 10:17:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:17:59 2013] Updating source flux to 1.4e-13
[Sun May  5 10:18:09 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Sun May  5 10:18:09 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun May  5 10:18:14 2013] xmm0085220201/analysis//spectral/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete