[Sun May  5 07:10:04 2013] Detection parameters:
  Position = (391.7, 341.1) = 12 1 23.31 -18 47 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.8 +/- 10.6
  Background counts = 17.6
  Rate = 0.002 +/- 0.0004

[Sun May  5 07:10:06 2013] Off-axis axis estimate = 7.44'
[Sun May  5 07:10:38 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:10:38 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Sun May  5 07:10:38 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.122
[Sun May  5 07:10:38 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 10.15"
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src31.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src31.csv
[Sun May  5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun May  5 07:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src31.csv
[Sun May  5 07:10:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:10:40 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun May  5 07:10:40 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun May  5 07:10:40 2013] Fit fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun May  5 07:11:10 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.377980 pixels away
[Sun May  5 07:11:10 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:10 2013] Assessing source extent using major
[Sun May  5 07:11:10 2013] Source does appear to be extended
[Sun May  5 07:11:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:11:28 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:11:28 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Sun May  5 07:11:28 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.122
[Sun May  5 07:11:28 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.15"
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src29.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src29.csv
[Sun May  5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May  5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src29.csv
[Sun May  5 07:11:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:30 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May  5 07:11:30 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May  5 07:11:30 2013] Fit fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun May  5 07:11:55 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 31.179482 pixels away
[Sun May  5 07:11:55 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.117467 pixels away
[Sun May  5 07:11:55 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 23.493232 pixels away
[Sun May  5 07:11:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:55 2013] Assessing source extent using major
[Sun May  5 07:11:55 2013] Source does appear to be extended
[Sun May  5 07:11:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:16:51 2013] XMMSAS src. selection expression = ellipse(34032.616302, 29625.294220, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 10:16:51 2013] Not overwriting source region fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_src.reg
[Sun May  5 10:16:51 2013] Extracting stamp from image fullrun_mos2_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (354, 304) - (429, 379)
[Sun May  5 10:16:51 2013] XMMSAS bgd. selection expression = annulus(34032.616302, 29625.294220, 1087.500000, 2175.000000, X, Y) && !ellipse(32153.429680, 29793.186654, 867.688025, 456.440013, 303.467173, X, Y) && !ellipse(34882.319437, 27572.829663, 1371.513856, 492.485610, 82.973724, X, Y)
[Sun May  5 10:16:51 2013] Writing fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14.gif
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun May  5 10:16:53 2013] Mean detx,y = (10078.97, -999.36) 
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_src.img and ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun May  5 10:16:53 2013] Setting source spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun May  5 10:16:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun May  5 10:16:53 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun May  5 10:16:57 2013] Not generating rmf since there are only 48 counts
[Sun May  5 10:16:57 2013] rmf not generated due to insufficient counts
[Sun May  5 10:16:57 2013] fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Sun May  5 10:17:57 2013] Updating aperture counts using extracted products
[Sun May  5 10:17:57 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 163.00
[Sun May  5 10:17:57 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_bgd.pi.gz = 819.00
[Sun May  5 10:17:58 2013] Got source and background scale factors 1340800.000000, 9213232.000000
[Sun May  5 10:17:58 2013] User source parameters:
  Position = (391.7, 341.1) = 12 1 23.31 -18 47 7.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 43.8 +/- 13.8
  Background aperture counts = 119.2
  Rate = 0.0008 +/- 0.0003

[Sun May  5 10:17:58 2013] Updating counts from extracted products
[Sun May  5 10:17:58 2013] Set source signif. to 43.81/10.92 = 4.01
[Sun May  5 10:18:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:18:00 2013] Using photon index=1.80, rate=0.000843, arf fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14.arf
[Sun May  5 10:18:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:18:00 2013] Updating source flux to 1.6e-14
[Sun May  5 10:18:09 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:18:14 2013] xmm0085220201/analysis//spectral/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete