[Sun May 5 07:10:04 2013] Detection parameters: Position = (288.7, 257.1) = 12 1 54.87 -18 53 11.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1897.0 +/- 53.3 Background counts = 24.1 Rate = 0.04 +/- 0.001 [Sun May 5 07:10:06 2013] Off-axis axis estimate = 3.08' [Sun May 5 07:10:38 2013] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting [Sun May 5 07:10:38 2013] Initial guess for spatial extent in simple fitting = 7.97" [Sun May 5 07:10:38 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.920 [Sun May 5 07:10:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.97" [Sun May 5 07:10:38 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src1.ximg exists [Sun May 5 07:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src1.csv [Sun May 5 07:10:38 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src1_1.ximg exists [Sun May 5 07:10:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src1.csv [Sun May 5 07:10:38 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sun May 5 07:10:39 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sun May 5 07:10:39 2013] Fit fullrun_mos2_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sun May 5 07:11:10 2013] Spatial fit model total counts = 3655.950000, observed total counts = 3520.000000 [Sun May 5 07:11:10 2013] Offset between fit and detection position for source 1 = 1.656485 pixels [Sun May 5 07:11:10 2013] 3702.760000 total counts/ 1489.000000 bgd. counts: snr = 57.369780 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.656485 pixels Position = (290.3, 257.6) = 12 1 54.38 -18 53 9.6 Extent = 10.9 (10.3-11.5)", rotation angle = 0 Source counts = 2213.8 +/- 60.9 Background counts = 1489.0 Rate = 0.04 +/- 0.001 [Sun May 5 07:11:10 2013] Vigneting correction estimate = 1.000000 [Sun May 5 07:11:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 07:11:10 2013] Assessing source extent using major axis lower bound [Sun May 5 07:11:10 2013] Source does appear to be extended [Sun May 5 07:11:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 07:11:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 5 07:11:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 5 07:11:28 2013] Initial guess for spatial extent in simple fitting = 10.88" [Sun May 5 07:11:28 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999 [Sun May 5 07:11:28 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.88" [Sun May 5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src1.ximg exists [Sun May 5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src1.csv [Sun May 5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src1_1.ximg exists [Sun May 5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src1.csv [Sun May 5 07:11:29 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sun May 5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src1.csv [Sun May 5 07:11:29 2013] fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sun May 5 07:11:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src1.csv [Sun May 5 07:11:29 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:11:55 2013] Warning, spatial fit 1 centroid is now closest to src. 36 [Sun May 5 07:11:55 2013] Source 1 is offset by 4.537002 and -2.201851 pixels which is larger than 2 X fitted extent = 1.654262 x 13.234115, not incorporating fit results [Sun May 5 07:11:55 2013] Spatial fit model total counts = 926.061000, observed total counts = 843.000000 [Sun May 5 07:11:55 2013] Offset between fit and detection position for source 1 = 2.649589 pixels [Sun May 5 07:11:55 2013] Warning, changing simple spatial fit ID from 1 to 36 [Sun May 5 07:11:55 2013] 939.480000 total counts/ 637.311000 bgd. counts: snr = 11.969450 Spatial fit parameters: Offset between fit and detection position for source 1 = 2.649589 pixels Position = (292.8, 256.6) = 12 1 53.63 -18 53 13.9 Extent = 8.3 (6.6-11.5)" x 7.6 (6.0-9.2)", rotation angle = 349 (328-0) degrees Source counts = 302.2 +/- 30.7 Background counts = 637.3 Rate = 0.006 +/- 0.0006 [Sun May 5 07:11:55 2013] Vigneting correction estimate = 1.000000 [Sun May 5 07:11:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 07:11:55 2013] Assessing source extent using major axis lower bound [Sun May 5 07:11:55 2013] Source does appear to be extended [Sun May 5 07:11:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.72 [Sun May 5 10:16:50 2013] XMMSAS src. selection expression = ellipse(25421.998000, 22274.260000, 496.894214, 453.559813, 349.448000, X, Y) [Sun May 5 10:16:50 2013] Not overwriting source region fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_src.reg [Sun May 5 10:16:50 2013] Extracting stamp from image fullrun_mos2_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (264, 228) - (321, 285) [Sun May 5 10:16:50 2013] XMMSAS bgd. selection expression = annulus(25421.998000, 22274.260000, 828.157024, 1656.314048, X, Y) && !ellipse(26045.394000, 23252.520000, 273.338408, 273.338408, 0.000000, X, Y) && !ellipse(25850.058000, 24299.672200, 386.961611, 386.961611, 0.000000, X, Y) && !ellipse(24609.739441, 23782.028748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.894000, 23648.818000, 1151.368033, 1151.368033, 0.000000, X, Y) && !ellipse(26741.504944, 23636.365875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.001648, 21317.407532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.023621, 24162.890045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24010.612000, 21002.628000, 1344.496039, 1344.496039, 0.000000, X, Y) && !ellipse(25939.712646, 21551.308975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24017.317444, 22233.331573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27080.626526, 22615.695618, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26417.347107, 24572.882324, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 10:16:50 2013] Writing fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1.gif [Sun May 5 10:16:52 2013] ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0085220201/products/events/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create [Sun May 5 10:16:52 2013] Mean detx,y = (-1082.48, 1221.90) [Sun May 5 10:16:52 2013] ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0085220201/products/images/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create [Sun May 5 10:16:52 2013] ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create [Sun May 5 10:16:52 2013] Setting source spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sun May 5 10:16:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sun May 5 10:16:52 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create [Sun May 5 10:16:57 2013] fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create [Sun May 5 10:16:57 2013] fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create [Sun May 5 10:17:55 2013] Updating aperture counts using extracted products [Sun May 5 10:17:55 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2300.00 [Sun May 5 10:17:55 2013] Total counts from fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 59.00 [Sun May 5 10:17:55 2013] Got source and background scale factors 653328.000000, 104000.000000 [Sun May 5 10:17:55 2013] User source parameters: Position = (292.8, 256.6) = 12 1 53.63 -18 53 13.9 Extent = 8.3 (6.6-11.5)" x 7.6 (6.0-9.2)", rotation angle = 349 (328-0) degrees Source aperture counts = 1929.4 +/- 49.0 Background aperture counts = 370.6 Rate = 0.04 +/- 0.0009 [Sun May 5 10:17:59 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 10:17:59 2013] Using photon index=1.80, rate=0.00582, arf fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1.arf [Sun May 5 10:17:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 10:17:59 2013] Updating source flux to 7.1e-14 [Sun May 5 10:18:09 2013] Flag b found in src. 1 procflags, skipping spectral fitting [Sun May 5 10:18:14 2013] xmm0085220201/analysis//spectral/fullrun_mos2_xmm0085220201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete