[Sun May  5 07:10:03 2013] Detection parameters:
  Position = (299.4, 248.9) = 12 1 51.59 -18 53 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.4 +/- 14.8
  Background counts = 23.5
  Rate = 0.002 +/- 0.0003

[Sun May  5 07:10:04 2013] Off-axis axis estimate = 3.59'
[Sun May  5 07:10:35 2013] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:10:35 2013] Initial guess for spatial extent in simple fitting = 8.22"
[Sun May  5 07:10:35 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Sun May  5 07:10:35 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.22"
[Sun May  5 07:10:36 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src22.ximg exists
[Sun May  5 07:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src22.csv
[Sun May  5 07:10:36 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun May  5 07:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src22.csv
[Sun May  5 07:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:10:37 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun May  5 07:10:37 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun May  5 07:10:37 2013] Fit fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sun May  5 07:11:00 2013] Warning, spatial fit 22 centroid is now closest to src. 30
[Sun May  5 07:11:00 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:00 2013] Assessing source extent using major
[Sun May  5 07:11:00 2013] Source does appear to be extended
[Sun May  5 07:11:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:11:00 2013] Source is confused with source 28
[Sun May  5 07:11:27 2013] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:11:27 2013] Initial guess for spatial extent in simple fitting = 8.22"
[Sun May  5 07:11:27 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Sun May  5 07:11:27 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 8.22"
[Sun May  5 07:11:27 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src22.ximg exists
[Sun May  5 07:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src22.csv
[Sun May  5 07:11:27 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun May  5 07:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src22.csv
[Sun May  5 07:11:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun May  5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun May  5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun May  5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun May  5 07:11:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:47 2013] Warning, spatial fit 22 centroid is now closest to src. 30
[Sun May  5 07:11:47 2013] Spatial fit model total counts = 1106.210000, observed total counts = 2471.000000
[Sun May  5 07:11:47 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 07:11:47 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:47 2013] Assessing source extent using major
[Sun May  5 07:11:47 2013] Source does appear to be extended
[Sun May  5 07:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:16:46 2013] XMMSAS src. selection expression = ellipse(26001.505798, 21608.653625, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 10:16:46 2013] Not overwriting source region fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_src.reg
[Sun May  5 10:16:46 2013] Extracting stamp from image fullrun_mos1_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (262, 211) - (337, 286)
[Sun May  5 10:16:46 2013] XMMSAS bgd. selection expression = annulus(26001.505798, 21608.653625, 1087.500000, 2175.000000, X, Y) && !ellipse(25209.529000, 22356.842200, 870.184025, 870.184025, 0.000000, X, Y) && !ellipse(26043.426600, 23256.156820, 446.238413, 446.238413, 0.000000, X, Y) && !ellipse(24775.641000, 23599.928800, 1079.768031, 1079.768031, 0.000000, X, Y) && !ellipse(25612.697998, 23616.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26029.192444, 22209.591629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25526.852936, 21736.341949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.571228, 22837.541901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27501.416809, 19781.182358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.290497, 20792.490982, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 10:16:46 2013] Writing fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31.gif
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/events/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0085220201/products/events/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sun May  5 10:16:47 2013] Mean detx,y = (2283.08, 658.39) 
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/images/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_src.img and ../../xmm0085220201/products/images/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/spectra/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sun May  5 10:16:47 2013] Setting source spectrum file to fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun May  5 10:16:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sun May  5 10:16:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 10:16:50 2013] rmf not generated due to insufficient counts
[Sun May  5 10:16:50 2013] fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Sun May  5 10:17:52 2013] Updating aperture counts using extracted products
[Sun May  5 10:17:52 2013] Total counts from fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 483.00
[Sun May  5 10:17:52 2013] Total counts from fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_bgd.pi.gz = 1176.00
[Sun May  5 10:17:52 2013] Got source and background scale factors 1292252.000000, 5760188.000000
[Sun May  5 10:17:52 2013] User source parameters:
  Position = (299.4, 248.9) = 12 1 51.59 -18 53 48.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 219.2 +/- 23.0
  Background aperture counts = 263.8
  Rate = 0.004 +/- 0.0004

[Sun May  5 10:17:52 2013] Updating counts from extracted products
[Sun May  5 10:17:52 2013] Set source signif. to 219.17/16.24 = 13.49
[Sun May  5 10:17:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:17:55 2013] Using photon index=1.80, rate=0.00422, arf fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31.arf
[Sun May  5 10:17:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:17:55 2013] Updating source flux to 4.5e-14
[Sun May  5 10:18:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:18:09 2013] xmm0085220201/analysis//spectral/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete