[Sun May 5 07:10:03 2013] Detection parameters: Position = (294.0, 250.4) = 12 1 53.26 -18 53 34.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 93.8 +/- 15.4 Background counts = 22.7 Rate = 0.002 +/- 0.0003 [Sun May 5 07:10:04 2013] Off-axis axis estimate = 3.50' [Sun May 5 07:10:35 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Sun May 5 07:10:35 2013] Initial guess for spatial extent in simple fitting = 8.18" [Sun May 5 07:10:35 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.750 [Sun May 5 07:10:35 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.18" [Sun May 5 07:10:36 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src24.ximg exists [Sun May 5 07:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src24.csv [Sun May 5 07:10:36 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src24_1.ximg exists [Sun May 5 07:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src24.csv [Sun May 5 07:10:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:10:37 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Sun May 5 07:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src24.csv [Sun May 5 07:10:37 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Sun May 5 07:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src24.csv [Sun May 5 07:10:37 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:11:00 2013] Source 30 is offset by 1.762011 and -7.161311 pixels which is larger than 2 X fitted extent = 3.768170 x 3.768170, not incorporating fit results [Sun May 5 07:11:00 2013] Spatial fit model total counts = 660.302000, observed total counts = 2471.000000 [Sun May 5 07:11:00 2013] Poor agreement between spatial fit and data for source 30 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 07:11:00 2013] Vigneting correction estimate = 1.000000 [Sun May 5 07:11:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 07:11:00 2013] Assessing source extent using major [Sun May 5 07:11:00 2013] Source does appear to be extended [Sun May 5 07:11:00 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 07:11:00 2013] Source is confused with source 31 [Sun May 5 07:11:27 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting [Sun May 5 07:11:27 2013] Initial guess for spatial extent in simple fitting = 8.18" [Sun May 5 07:11:27 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.750 [Sun May 5 07:11:27 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 8.18" [Sun May 5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src24.ximg exists [Sun May 5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src24.csv [Sun May 5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src24_1.ximg exists [Sun May 5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src24.csv [Sun May 5 07:11:28 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Sun May 5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src24.csv [Sun May 5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Sun May 5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src24.csv [Sun May 5 07:11:28 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:11:47 2013] Source 30 is offset by 1.727091 and -6.920009 pixels which is larger than 2 X fitted extent = 2.201163 x 2.201163, not incorporating fit results [Sun May 5 07:11:47 2013] Warning, spatial fit 24 centroid is now closest to src. 31 [Sun May 5 07:11:47 2013] Vigneting correction estimate = 1.000000 [Sun May 5 07:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 07:11:47 2013] Assessing source extent using major [Sun May 5 07:11:47 2013] Source does appear to be extended [Sun May 5 07:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 10:16:46 2013] XMMSAS src. selection expression = ellipse(25526.852936, 21736.341949, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 10:16:46 2013] Not overwriting source region fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_src.reg [Sun May 5 10:16:46 2013] Extracting stamp from image fullrun_mos1_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (256, 213) - (331, 288) [Sun May 5 10:16:46 2013] XMMSAS bgd. selection expression = annulus(25526.852936, 21736.341949, 1087.500000, 2175.000000, X, Y) && !ellipse(25209.529000, 22356.842200, 870.184025, 870.184025, 0.000000, X, Y) && !ellipse(26043.426600, 23256.156820, 446.238413, 446.238413, 0.000000, X, Y) && !ellipse(24775.641000, 23599.928800, 1079.768031, 1079.768031, 0.000000, X, Y) && !ellipse(25612.697998, 23616.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26029.192444, 22209.591629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26001.505798, 21608.653625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.571228, 22837.541901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27501.416809, 19781.182358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.290497, 20792.490982, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 10:16:46 2013] Writing fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30.gif [Sun May 5 10:16:47 2013] ../../xmm0085220201/products/events/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0085220201/products/events/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create [Sun May 5 10:16:47 2013] Mean detx,y = (1756.35, 909.17) [Sun May 5 10:16:47 2013] ../../xmm0085220201/products/images/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_src.img and ../../xmm0085220201/products/images/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create [Sun May 5 10:16:47 2013] ../../xmm0085220201/products/spectra/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create [Sun May 5 10:16:47 2013] Setting source spectrum file to fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Sun May 5 10:16:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_bgd.pi.gz [Sun May 5 10:16:47 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create [Sun May 5 10:16:50 2013] Not generating rmf since there are only 93 counts [Sun May 5 10:16:50 2013] rmf not generated due to insufficient counts [Sun May 5 10:16:50 2013] fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30.arf exists, delete to re-create [Sun May 5 10:17:52 2013] Updating aperture counts using extracted products [Sun May 5 10:17:52 2013] Total counts from fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 1259.00 [Sun May 5 10:17:52 2013] Total counts from fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1051.00 [Sun May 5 10:17:52 2013] Got source and background scale factors 1257404.000000, 5168904.000000 [Sun May 5 10:17:52 2013] User source parameters: Position = (294.0, 250.4) = 12 1 53.26 -18 53 34.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1003.3 +/- 36.5 Background aperture counts = 255.7 Rate = 0.02 +/- 0.0007 [Sun May 5 10:17:52 2013] Updating counts from extracted products [Sun May 5 10:17:52 2013] Set source signif. to 1003.33/15.99 = 62.75 [Sun May 5 10:17:55 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 10:17:55 2013] Using photon index=1.80, rate=0.0193, arf fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30.arf [Sun May 5 10:17:55 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 10:17:55 2013] Updating source flux to 2.1e-13 [Sun May 5 10:18:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 10:18:09 2013] xmm0085220201/analysis//spectral/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete