[Sun May  5 07:10:03 2013] Detection parameters:
  Position = (349.7, 250.1) = 12 1 36.17 -18 53 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.0 +/- 14.0
  Background counts = 19.6
  Rate = 0.003 +/- 0.0003

[Sun May  5 07:10:04 2013] Off-axis axis estimate = 5.11'
[Sun May  5 07:10:35 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:10:35 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Sun May  5 07:10:35 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Sun May  5 07:10:35 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 8.98"
[Sun May  5 07:10:36 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src15.ximg exists
[Sun May  5 07:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src15.csv
[Sun May  5 07:10:36 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun May  5 07:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src15.csv
[Sun May  5 07:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:10:37 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun May  5 07:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun May  5 07:10:37 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun May  5 07:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun May  5 07:10:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:00 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.843095 pixels away
[Sun May  5 07:11:00 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:00 2013] Assessing source extent using major
[Sun May  5 07:11:00 2013] Source does appear to be extended
[Sun May  5 07:11:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 07:11:27 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Sun May  5 07:11:27 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Sun May  5 07:11:27 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Sun May  5 07:11:27 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 8.98"
[Sun May  5 07:11:27 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src15.ximg exists
[Sun May  5 07:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src15.csv
[Sun May  5 07:11:27 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May  5 07:11:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src15.csv
[Sun May  5 07:11:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May  5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun May  5 07:11:28 2013] fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May  5 07:11:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun May  5 07:11:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085220201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:11:47 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.843095 pixels away
[Sun May  5 07:11:47 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:11:47 2013] Assessing source extent using major
[Sun May  5 07:11:47 2013] Source does appear to be extended
[Sun May  5 07:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:16:46 2013] XMMSAS src. selection expression = ellipse(30378.172913, 21711.765671, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 10:16:46 2013] Not overwriting source region fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_src.reg
[Sun May  5 10:16:46 2013] Extracting stamp from image fullrun_mos1_xmm0085220201_pi300-10000_cl_sm2.00.img.gz, (312, 213) - (387, 288)
[Sun May  5 10:16:46 2013] XMMSAS bgd. selection expression = annulus(30378.172913, 21711.765671, 1087.500000, 2175.000000, X, Y) && !ellipse(27501.416809, 19781.182358, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 10:16:46 2013] Writing fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29.gif
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/events/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0085220201/products/events/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sun May  5 10:16:47 2013] Mean detx,y = (4439.87, -3218.30) 
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/images/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_src.img and ../../xmm0085220201/products/images/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/spectra/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0085220201/products/spectra/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sun May  5 10:16:47 2013] Setting source spectrum file to fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun May  5 10:16:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun May  5 10:16:47 2013] ../../xmm0085220201/products/lightcurves/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0085220201/products/lightcurves/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sun May  5 10:16:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 10:16:50 2013] rmf not generated due to insufficient counts
[Sun May  5 10:16:50 2013] fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Sun May  5 10:17:51 2013] Updating aperture counts using extracted products
[Sun May  5 10:17:52 2013] Total counts from fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 202.00
[Sun May  5 10:17:52 2013] Total counts from fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1042.00
[Sun May  5 10:17:52 2013] Got source and background scale factors 1260604.000000, 10773386.000000
[Sun May  5 10:17:52 2013] User source parameters:
  Position = (349.7, 250.1) = 12 1 36.17 -18 53 42.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 80.1 +/- 15.2
  Background aperture counts = 121.9
  Rate = 0.002 +/- 0.0003

[Sun May  5 10:17:52 2013] Updating counts from extracted products
[Sun May  5 10:17:52 2013] Set source signif. to 80.07/11.04 = 7.25
[Sun May  5 10:17:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:17:54 2013] Using photon index=1.80, rate=0.00154, arf fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29.arf
[Sun May  5 10:17:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:17:54 2013] Updating source flux to 2e-14
[Sun May  5 10:18:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:18:09 2013] xmm0085220201/analysis//spectral/fullrun_mos1_xmm0085220201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete