[Wed Sep  5 07:03:21 2012] Detection parameters:
  Position = (234.3, 181.5) = 12 2 12.37 -18 58 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.9 +/- 10.0
  Background counts = 14.9
  Rate = 0.003 +/- 0.0007

[Wed Sep  5 07:03:22 2012] Off-axis axis estimate = 9.67'
[Wed Sep  5 08:30:48 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 08:30:48 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Wed Sep  5 08:30:48 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.100
[Wed Sep  5 08:30:48 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.26"
[Wed Sep  5 08:58:35 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Sep  5 08:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_src18.csv
[Wed Sep  5 08:58:35 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Sep  5 08:58:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_src18.csv
[Wed Sep  5 08:58:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 08:58:35 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Sep  5 08:58:35 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Sep  5 08:58:35 2012] Fit fullrun_mos2_xmm0085220101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Sep  5 08:58:47 2012] Spatial fit model total counts = 163.062000, observed total counts = 163.000000
[Wed Sep  5 08:58:47 2012] Offset between fit and detection position for source 21 = 0.296955 pixels
[Wed Sep  5 08:58:47 2012] 165.471500 total counts/ 135.164000 bgd. counts: snr = 2.606871
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.296955 pixels
  Position = (234.6, 181.6) = 12 2 12.28 -18 58 40.3
  Extent = 4.8 (3.2-6.7)", rotation angle = 0
  Source counts = 30.3 +/- 12.9
  Background counts = 135.2
  Rate = 0.001 +/- 0.0005
[Wed Sep  5 08:58:47 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 08:58:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 08:58:47 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 08:58:47 2012] Source does appear to be extended
[Wed Sep  5 08:58:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 10:26:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 10:26:45 2012] Initial guess for spatial extent in simple fitting = 4.81"
[Wed Sep  5 10:26:45 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.873
[Wed Sep  5 10:26:45 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 4.81"
[Wed Sep  5 11:17:49 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_src18.ximg exists
[Wed Sep  5 11:17:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_src18.csv
[Wed Sep  5 11:17:49 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Sep  5 11:17:49 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_src18.csv
[Wed Sep  5 11:17:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 11:17:50 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Sep  5 11:17:50 2012] fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Sep  5 11:17:50 2012] Fit fullrun_mos2_xmm0085220101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Sep  5 11:18:07 2012] Spatial fit model total counts = 162.889000, observed total counts = 163.000000
[Wed Sep  5 11:18:07 2012] Offset between fit and detection position for source 21 = 0.014925 pixels
[Wed Sep  5 11:18:07 2012] 165.279300 total counts/ 134.563000 bgd. counts: snr = 2.647927
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.014925 pixels
  Position = (234.6, 181.6) = 12 2 12.28 -18 58 40.3
  Extent = 4.9 (3.2-6.8)", rotation angle = 0
  Source counts = 30.7 +/- 12.9
  Background counts = 134.6
  Rate = 0.001 +/- 0.0005
[Wed Sep  5 11:18:07 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 11:18:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 11:18:07 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 11:18:07 2012] Source does appear to be extended
[Wed Sep  5 11:18:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 11:41:14 2012] XMMSAS src. selection expression = ellipse(20364.446400, 15746.888200, 291.804608, 291.804608, 0.000000, X, Y)
[Wed Sep  5 11:41:14 2012] Writing source region out to fullrun_mos2_xmm0085220101_pi300-10000_pass1_cl_src21_src.reg
[Wed Sep  5 11:41:14 2012] Extracting stamp from image fullrun_mos2_xmm0085220101_pi300-10000_cl_sm2.00.img.gz, (218, 165) - (251, 198)
[Wed Sep  5 11:41:14 2012] XMMSAS bgd. selection expression = annulus(20364.446400, 15746.888200, 486.341014, 972.682028, X, Y) && !ellipse(19679.476151, 14826.828659, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 11:41:14 2012] Writing fullrun_mos2_xmm0085220101_pi300-10000_pass1_cl_src21.gif
[Wed Sep  5 11:45:01 2012] Mean detx,y = (-8888.21, 4078.55) 
[Wed Sep  5 11:45:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 11:45:09 2012] grppha failed
[Wed Sep  5 11:45:09 2012] Setting source spectrum file to fullrun_mos2_xmm0085220101_pi300-10000_pass1_cl_src21_src.pi.gz
[Wed Sep  5 11:45:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0085220101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Sep  5 11:46:47 2012] Not generating rmf since there are only 30 counts
[Wed Sep  5 11:46:47 2012] rmf not generated due to insufficient counts
[Wed Sep  5 11:47:14 2012] Updating aperture counts using extracted products
[Wed Sep  5 11:47:14 2012] Error reading totcts from fullrun_mos2_xmm0085220101_pi300-10000_pass1_cl_src21_src.pi.gz
[Wed Sep  5 11:47:14 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 11:47:16 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep  5 11:47:17 2012] xmm0085220101/analysis//spectral/fullrun_mos2_xmm0085220101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete