[Wed Aug 15 07:35:04 2012] Detection parameters:
  Position = (240.0, 294.5) = 19 7 45.13 7 8 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.3 +/- 13.9
  Background counts = 83.8
  Rate = 0.007 +/- 0.001

[Wed Aug 15 07:35:04 2012] Off-axis axis estimate = 4.24'
[Wed Aug 15 07:37:21 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:37:21 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Wed Aug 15 07:37:21 2012] source mask rpix=2.0, npix_max = 24, mask sum = 13, frac = 0.535
[Wed Aug 15 07:37:21 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.55"
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src13.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src13.csv
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src13.csv
[Wed Aug 15 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Aug 15 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:01:37 2012] Spatial fit model total counts = 14589.800000, observed total counts = 5845.000000
[Wed Aug 15 10:01:37 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 10:01:37 2012] Spatial fit model total counts = -613.889000, observed total counts = 854.000000
[Wed Aug 15 10:01:37 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 10:01:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 10:01:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 10:01:37 2012] Assessing source extent using major
[Wed Aug 15 10:01:37 2012] Source does appear to be extended
[Wed Aug 15 10:01:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 10:01:37 2012] Deleting source due to low Poisson probability 0.8