[Wed Aug 15 07:35:04 2012] Detection parameters:
  Position = (290.4, 317.9) = 19 7 30.40 7 9 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1645.4 +/- 53.4
  Background counts = 106.6
  Rate = 0.1 +/- 0.004

[Wed Aug 15 07:35:04 2012] Off-axis axis estimate = 1.52'
[Wed Aug 15 07:37:21 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:37:21 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Wed Aug 15 07:37:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.079
[Wed Aug 15 07:37:21 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.19"
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src11.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src11.csv
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src11.csv
[Wed Aug 15 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Aug 15 08:18:29 2012] Fit fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Aug 15 10:01:37 2012] Spatial fit model total counts = 6465.990000, observed total counts = 6466.000000
[Wed Aug 15 10:01:37 2012] Offset between fit and detection position for source 11 = 1.041989 pixels
[Wed Aug 15 10:01:37 2012] 6245.939000 total counts/ 5341.250000 bgd. counts: snr = 12.378780
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.041989 pixels
  Position = (290.5, 318.9) = 19 7 30.37 7 10 1.6
  Extent = 11.6 (10.0-14.0)", rotation angle = 0
  Source counts = 904.7 +/- 79.0
  Background counts = 5341.2
  Rate = 0.07 +/- 0.006
[Wed Aug 15 10:01:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 10:01:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 10:01:37 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 10:01:37 2012] Source does appear to be extended
[Wed Aug 15 10:01:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 10:02:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:02:04 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Wed Aug 15 10:02:04 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.054
[Wed Aug 15 10:02:04 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.55"
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src11.ximg exists
[Wed Aug 15 11:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src11.csv
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Aug 15 11:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src11.csv
[Wed Aug 15 11:10:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Aug 15 11:10:19 2012] Fit fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Aug 15 13:53:40 2012] Warning, spatial fit 11 centroid is now closest to src. 9
[Wed Aug 15 13:53:40 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:53:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:53:40 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 13:53:40 2012] Source does appear to be extended
[Wed Aug 15 13:53:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:53:54 2012] XMMSAS src. selection expression = ellipse(25226.647800, 27697.733400, 693.288020, 693.288020, 0.000000, X, Y)
[Wed Aug 15 13:53:54 2012] Writing source region out to fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src11_src.reg
[Wed Aug 15 13:53:54 2012] Extracting stamp from image fullrun_pn_xmm0085200401_pi300-10000_cl_sm2.00.img.gz, (251, 279) - (330, 359)
[Wed Aug 15 13:53:55 2012] XMMSAS bgd. selection expression = annulus(25226.647800, 27697.733400, 1155.480033, 2310.960066, X, Y) && !ellipse(26142.759000, 25753.308000, 1037.744030, 1037.744030, 0.000000, X, Y) && !ellipse(23702.421103, 25788.377400, 1176.512034, 1040.056030, 147.080300, X, Y) && !ellipse(22817.934000, 26610.560000, 648.442419, 648.442419, 0.000000, X, Y) && !ellipse(22516.160600, 25727.746000, 1259.544036, 1259.544036, 0.000000, X, Y) && !ellipse(21995.260000, 25417.622000, 1267.760036, 1267.760036, 0.000000, X, Y) && !ellipse(23181.588400, 24437.458000, 1238.008036, 1238.008036, 0.000000, X, Y) && !ellipse(25412.538000, 26511.622000, 1054.680030, 1054.680030, 0.000000, X, Y) && !ellipse(23499.316000, 26638.486000, 1351.728039, 1351.728039, 0.000000, X, Y) && !ellipse(22328.007263, 25960.283813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.400000, 27181.418000, 1188.176034, 1188.176034, 0.000000, X, Y)
[Wed Aug 15 13:53:55 2012] Writing fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src11.gif
[Wed Aug 15 14:45:11 2012] Mean detx,y = (-0.21, 2879.47) 
[Wed Aug 15 14:45:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:45:29 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:45:29 2012] Setting source spectrum file to fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Aug 15 14:45:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Aug 16 11:27:57 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:27:57 2012] Error reading totcts from fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Aug 16 11:27:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:27:57 2012] Using photon index=1.80, rate=0.0692, arf fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src11.arf
[Thu Aug 16 11:27:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:27:57 2012] Updating source flux to 1.9e-13