[Wed Aug 15 07:35:04 2012] Detection parameters:
  Position = (249.4, 276.4) = 19 7 42.38 7 7 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 682.8 +/- 133.6
  Background counts = 90.0
  Rate = 0.04 +/- 0.008

[Wed Aug 15 07:35:04 2012] Off-axis axis estimate = 3.90'
[Wed Aug 15 07:37:21 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 07:37:21 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Wed Aug 15 07:37:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.062
[Wed Aug 15 07:37:21 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.38"
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src10.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src10.csv
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src10.csv
[Wed Aug 15 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Aug 15 08:18:29 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Aug 15 08:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Aug 15 08:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 10:01:37 2012] Spatial fit model total counts = 1908.370000, observed total counts = 1534.000000
[Wed Aug 15 10:01:37 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 10:01:37 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.776322 pixels away
[Wed Aug 15 10:01:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 10:01:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 10:01:37 2012] Assessing source extent using major
[Wed Aug 15 10:01:37 2012] Source does appear to be extended
[Wed Aug 15 10:01:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 10:02:04 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:02:04 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Wed Aug 15 10:02:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.062
[Wed Aug 15 10:02:04 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.38"
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src10.ximg exists
[Wed Aug 15 11:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Aug 15 11:10:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 11:10:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Aug 15 11:10:19 2012] fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Aug 15 11:10:19 2012] Fit fullrun_pn_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Aug 15 13:53:40 2012] Source 10 is offset by 4.686238 and 7.124730 pixels which is larger than
2 X fitted extent = 4.512322 x 4.512322, not incorporating fit results
[Wed Aug 15 13:53:40 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:53:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:53:40 2012] Assessing source extent using major
[Wed Aug 15 13:53:40 2012] Source does appear to be extended
[Wed Aug 15 13:53:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:53:54 2012] XMMSAS src. selection expression = ellipse(21651.756699, 24000.261536, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 13:53:54 2012] Writing source region out to fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src10_src.reg
[Wed Aug 15 13:53:54 2012] Extracting stamp from image fullrun_pn_xmm0085200401_pi300-10000_cl_sm2.00.img.gz, (212, 239) - (287, 314)
[Wed Aug 15 13:53:54 2012] XMMSAS bgd. selection expression = annulus(21651.756699, 24000.261536, 1087.500000, 2175.000000, X, Y) && !ellipse(23702.421103, 25788.377400, 1176.512034, 1040.056030, 147.080300, X, Y) && !ellipse(22817.934000, 26610.560000, 648.442419, 648.442419, 0.000000, X, Y) && !ellipse(22516.160600, 25727.746000, 1259.544036, 1259.544036, 0.000000, X, Y) && !ellipse(21995.260000, 25417.622000, 1267.760036, 1267.760036, 0.000000, X, Y) && !ellipse(23181.588400, 24437.458000, 1238.008036, 1238.008036, 0.000000, X, Y) && !ellipse(23499.316000, 26638.486000, 1351.728039, 1351.728039, 0.000000, X, Y) && !ellipse(22328.007263, 25960.283813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.400000, 27181.418000, 1188.176034, 1188.176034, 0.000000, X, Y) && !ellipse(23815.654694, 23375.164093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22999.368591, 23658.174286, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 13:53:54 2012] Writing fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src10.gif
[Wed Aug 15 14:44:33 2012] Mean detx,y = (2521.39, -1327.21) 
[Wed Aug 15 14:44:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 14:45:00 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 14:45:01 2012] Setting source spectrum file to fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Aug 15 14:45:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Aug 16 04:53:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 04:53:49 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:27:57 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:27:57 2012] Error reading totcts from fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug 16 11:27:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:27:57 2012] Using photon index=1.80, rate=0.0391, arf fullrun_pn_xmm0085200401_pi300-10000_pass1_cl_src10.arf
[Thu Aug 16 11:27:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:27:57 2012] Updating source flux to 1e-13
[Thu Aug 16 11:34:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting