[Wed Aug 15 07:35:25 2012] Detection parameters:
  Position = (256.2, 291.0) = 19 7 40.40 7 8 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1036.5 +/- 43.1
  Background counts = 60.0
  Rate = 0.05 +/- 0.002

[Wed Aug 15 07:35:25 2012] Off-axis axis estimate = 3.11'
[Wed Aug 15 08:18:29 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 08:18:29 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Wed Aug 15 08:18:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.917
[Wed Aug 15 08:18:29 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.98"
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src9.ximg exists
[Wed Aug 15 09:16:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src9.csv
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Aug 15 09:16:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src9.csv
[Wed Aug 15 09:16:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Aug 15 09:16:10 2012] Fit fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Aug 15 10:01:45 2012] Spatial fit model total counts = 4896.930000, observed total counts = 4905.000000
[Wed Aug 15 10:01:45 2012] Offset between fit and detection position for source 6 = 2.805535 pixels
[Wed Aug 15 10:01:45 2012] Warning, changing simple spatial fit ID from 9 to 7
[Wed Aug 15 10:01:45 2012] 5033.605000 total counts/ 4909.920000 bgd. counts: snr = 1.765143
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.805535 pixels
  Position = (258.9, 291.7) = 19 7 39.61 7 8 3.2
  Extent = 10.1 (2.9-15.4)", rotation angle = 0
  Source counts = 123.7 +/- 70.9
  Background counts = 4909.9
  Rate = 0.008 +/- 0.004
[Wed Aug 15 10:01:45 2012] Spatial fit model total counts = 5278.420000, observed total counts = 5270.000000
[Wed Aug 15 10:01:45 2012] Offset between fit and detection position for source 6 = 0.986972 pixels
[Wed Aug 15 10:01:45 2012] Warning, changing simple spatial fit ID from 7 to 8
[Wed Aug 15 10:01:45 2012] 5287.987000 total counts/ 4882.890000 bgd. counts: snr = 5.797230
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.986972 pixels
  Position = (257.9, 291.7) = 19 7 39.90 7 8 3.0
  Extent = 15.5 (15.3-30.9)" x 9.9 (5.5-14.9)", rotation angle = 330
  Source counts = 405.1 +/- 72.7
  Background counts = 4882.9
  Rate = 0.03 +/- 0.004
[Wed Aug 15 10:01:45 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 10:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 10:01:45 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 10:01:45 2012] Source does appear to be extended
[Wed Aug 15 10:01:45 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Wed Aug 15 10:01:45 2012] Source is confused with source 7
[Wed Aug 15 11:10:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 11:10:19 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Wed Aug 15 11:10:19 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.900
[Wed Aug 15 11:10:19 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.69"
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src9.ximg exists
[Wed Aug 15 12:47:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src9.csv
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Aug 15 12:47:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src9.csv
[Wed Aug 15 12:47:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Aug 15 12:47:12 2012] Fit fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Aug 15 13:53:44 2012] Warning, spatial fit 9 centroid is now closest to src. 10
[Wed Aug 15 13:53:44 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:53:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:53:44 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 13:53:44 2012] Source does appear to be extended
[Wed Aug 15 13:53:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Thu Aug 16 05:32:00 2012] XMMSAS src. selection expression = ellipse(22391.780000, 25325.338000, 927.162027, 595.224617, 330.118200, X, Y)
[Thu Aug 16 05:32:00 2012] Writing source region out to fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src6_src.reg
[Thu Aug 16 05:32:00 2012] Extracting stamp from image fullrun_mos1_xmm0085200401_pi300-10000_cl_sm2.00.img.gz, (205, 238) - (311, 345)
[Thu Aug 16 05:32:00 2012] XMMSAS bgd. selection expression = annulus(22391.780000, 25325.338000, 1545.270044, 3090.540089, X, Y) && !ellipse(23726.757600, 25824.019200, 1072.320031, 1072.320031, 0.000000, X, Y) && !ellipse(26001.731400, 26141.730400, 1043.728030, 828.832024, 58.194900, X, Y) && !ellipse(25467.438000, 26307.350000, 1085.904031, 1085.904031, 0.000000, X, Y) && !ellipse(26045.043528, 25853.017355, 1872.560054, 1158.453113, 61.123245, X, Y) && !ellipse(22831.962718, 26571.974400, 748.158422, 748.158422, 0.000000, X, Y) && !ellipse(25035.324400, 24722.664000, 1670.448048, 1093.880031, 128.509000, X, Y) && !ellipse(23195.952000, 24068.920000, 1261.520036, 1041.192030, 359.941830, X, Y) && !ellipse(22442.612000, 25652.766000, 1277.296037, 1277.296037, 0.000000, X, Y) && !ellipse(21499.472000, 24881.506000, 1871.504054, 1871.504054, 0.000000, X, Y) && !ellipse(24936.573547, 25879.783325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23754.651400, 25376.134000, 1195.448034, 1195.448034, 0.000000, X, Y) && !ellipse(25273.253140, 27736.624400, 884.808025, 884.808025, 0.000000, X, Y) && !ellipse(23554.616000, 26764.628000, 1171.760034, 646.861619, 315.396629, X, Y) && !ellipse(23504.251617, 23386.575409, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Aug 16 05:32:00 2012] Writing fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src6.gif
[Thu Aug 16 05:57:49 2012] Mean detx,y = (93.73, 1804.12) 
[Thu Aug 16 05:57:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 05:58:00 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 05:58:00 2012] Setting source spectrum file to fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Aug 16 05:58:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Aug 16 11:27:58 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:27:58 2012] Error reading totcts from fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Aug 16 11:27:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:27:58 2012] Using photon index=1.80, rate=0.0251, arf fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src6.arf
[Thu Aug 16 11:27:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:27:58 2012] Updating source flux to 2.4e-13
[Thu Aug 16 11:28:00 2012] Flag c found in src. 6 procflags, skipping spectral fitting